VOGONS

Search

Common searches

Floppy drive problem on win95B

Topic actions

First post, by mig81

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hello, I may have a problem with the driver of the floppy drive 3,5" 1,44mb because win 95B detects as 5 1/4 and it not works good. No problem in dos. How could I fix this problem?

Hardware:
Motherboard milex socket5 with pentium 90mhz
Isa controller for com lpt ide floppy
Cable floppy with 2x 3,5 drive connectos and 1x5,25 drive connector.
Floppy 3,5 is setted on the end of the swapped floppy cable as drive A.

Thanks

Attachments

Reply 3 of 4, by mig81

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Thanks guys! On the isa controller I jumpered enable all the ports and there arent other jumpers to set. On the bios I setted on drive A 3,5 1.44mb correctly....i tried even an other floppy and an other cable but it's the same.
I tried to delate the driver but it's detected as 5,25 and with the error of the "Dos compatibility mode"

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window