I've been ofered a 4th one, 28euros including shipping. Love it!
I think I'm going to go for this one and the 3rd one of the previous post.

I think that fourth one is the best! I have one very much like it and I actually like those old toggle switches - no question as to whether it is "on" or "off"

I vote for the Jetway board as well and that 4th case. Love the Tomato board, but AGP really opens up graphics options.

I like #4 quite a bit too! Will make a nice looking building at the end of the day.

I also vote for the Jetway mobo and case #4 (unless you really need the extra ISA slot).

I'd use the Shuttle board, I ran a Shuttle Hot-603 (slightly older, just before AGP) back in the day and loved it..

Pingaloka wrote:

I've been ofered a 4th one, 28euros including shipping. Love it! I think I'm going to go for this one and the 3rd one of the pre […]
Show full quote

I've been ofered a 4th one, 28euros including shipping. Love it!
I think I'm going to go for this one and the 3rd one of the previous post.

I have two of these cases at present and have had others like it in the past including one full tower. I personally think it's one of the best looking AT style case designs.

sliderider wrote:

Pingaloka wrote:

I've been ofered a 4th one, 28euros including shipping. Love it! I think I'm going to go for this one and the 3rd one of the pre […]
Show full quote

I've been ofered a 4th one, 28euros including shipping. Love it!
I think I'm going to go for this one and the 3rd one of the previous post.

I have two of these cases at present and have had others like it in the past including one full tower. I personally think it's one of the best looking AT style case designs.

Yes is a pretty nice case, I haven't seen it live yet, I can't wait for it to get to its new home 😊

Pingaloka wrote:

Sorry, I may have not explained myself well enough. What I mean, is this the cable I need? But you just answered my question. Th […]
Show full quote

gerwin wrote:

Look up what? What you are showing is the usual "male 6 pin header rm pitch=2.54".

Sorry, I may have not explained myself well enough.
What I mean, is this the cable I need? But you just answered my question. Thanx!
( I know...newbee questions 😊 )

Fairly easy to make from front panel wires, PS/2 port from a dead mobo and old videocard with S-Video out:

I added a ferrite filter just in case, I had one to spare.

Can you show that from the other side? Nonetheless looks awesome.

So, Im' gathering parts for this Only-Dos-Time-Machine.
Specially looking for sound related parts.
I was hoping to use a SB Pro 2 + Roland MPU-IPC-T + Sound Canvas + Mt32, but this is a very expensive setup for me at the moment.
I haven't got an Mpu-IPC-T neither a Sound Canvas.
I'm going for a more practical setup, a SB16 CT2330 + NEC XR385 (I prefer this one over the Sound Canvas) + MT32 + SoftMPU
I like this setup, the only downside is the SB16's high noise, that's why I would have preferred the SB Pro2 over the SB16. Oh well...nothing's perfect 😀

BTW, got this on the mail today.
The unit is absolutely like new, not even a scratch!

Pingaloka, wow, that's pretty cool! What card are you going to plug it into?

obobskivich wrote:

Can you show that from the other side? Nonetheless looks awesome.

There is not much I can show, it's all covered with white silicon... Savage job, I know. I could do better now, yet while this one works I don't have to 😁

I used this info http://pinouts.ru/Inputs/PS2Mouse_pinout.shtml
The stand-alone pin is pin 1, the absent pin is pin 2, the other pins are 3,4,5. Just in case you can always check if pin 3 is connected to Ground and pin 4 to +5V line.

RacoonRider wrote:

Pingaloka, wow, that's pretty cool! What card are you going to plug it into?

obobskivich wrote:

Can you show that from the other side? Nonetheless looks awesome.

I'm putting it along a SB16 CT2230 + NEC XR385

RacoonRider wrote:

Savage job, I know.

Is there even solder in there or is it just encased in silicon to hold it in contact? 🤣

But seriously - it probably doesn't want for strain relief, and if it works, it works. 😎

obobskivich wrote:

RacoonRider wrote:

Savage job, I know.

Is there even solder in there or is it just encased in silicon to hold it in contact? 🤣

But seriously - it probably doesn't want for strain relief, and if it works, it works. 😎

There is solder, yet I knew little about solder back in the days 😁

Oh and I forgot to say - that MT32 looks PRISTINE. Very nice find.

obobskivich wrote:

Oh and I forgot to say - that MT32 looks PRISTINE. Very nice find.

Yeah! Can't wait to use it. My new case is probably arriving today.... 😊

Pingaloka wrote:

obobskivich wrote:

Oh and I forgot to say - that MT32 looks PRISTINE. Very nice find.

Yeah! Can't wait to use it. My new case is probably arriving today.... 😊

Gratz. I was going to bid on that MT32, but I was in the Grand Canyon at that time and with no WI-FI on the motel and crazy roaming charges prevented me ...

vetz wrote:

Pingaloka wrote:

obobskivich wrote:

Oh and I forgot to say - that MT32 looks PRISTINE. Very nice find.

Yeah! Can't wait to use it. My new case is probably arriving today.... 😊

Gratz. I was going to bid on that MT32, but I was in the Grand Canyon at that time and with no WI-FI on the motel and crazy roaming charges prevented me ...

I got this one from a private seller here in Spain Vetz, not ebay...

Pingaloka wrote:

I got this one from a private seller here in Spain Vetz, not ebay...

Quite the coincidence then! There was a boxed MT32 for sale on Yahoo Auctions that looked exactly like yours. So I thought you got it from there 😀