Does anybody knows where it can find these drivers? \ VOGONS

Does anybody knows where it can find these drivers?

Topic actions

Post a reply

First post, by Robin4

Posted on 2014-06-21, 02:31

Robin4 Offline

Rank l33t

Rank: l33t
Posts: 2418
Joined: 2011-04-04, 09:52
Location: The Netherlands

http://web.archive.org/web/19990506080407/htt … l800Update.html

DOS ASPI MANAGER
Description: This file contains the PEL-800 ASPI Manager Driver and the Installation Instructions file.
Version: 2.15
File Date: 04/14/95
File Size: 11,218 bytes
File Name: ASPI800.EXE

and

WINDOWS 3.1
Description: This file contains the Windows 3.1 ASPI Manager for PE Logic products and and the Installation Instructions file.
Version: 1.10
File Date: 07/08/96
File Size: 7,002 bytes
File Name: WINASPI.EXE

~ At least it can do black and white~

Reply 1 of 4, by Matth79

Posted on 2014-06-21, 17:47

Matth79 Offline

Rank Oldbie

Rank: Oldbie
Posts: 587
Joined: 2014-05-19, 14:24

So far, an old corelSCSI that has PEL800.SYS
ftp://humboldt.sysbot.biologie.uni-muenchen.d … Coreldrv_MO.16/

Reply 2 of 4, by Stiletto

Posted on 2014-06-23, 22:10

Stiletto Offline

Rank l33t++

Rank: l33t++
Posts: 5133
Joined: 2002-07-01, 21:57

I'm not doing much better at the moment...

"I see a little silhouette-o of a man, Scaramouche, Scaramouche, will you
do the Fandango!" - Queen

Stiletto

Reply 3 of 4, by Robin4

Posted on 2014-06-23, 23:40

Robin4 Offline

Rank l33t

Rank: l33t
Posts: 2418
Joined: 2011-04-04, 09:52
Location: The Netherlands

Stiletto wrote:
I'm not doing much better at the moment...

Both, thanks for the help..

I red the readme file that is on the same FTP:

P.E. Logic 'PEL-8xx Series 2.00 PEL800.SYS
8-bit' Host Adapter

To install an ASPI manager that isn't provided with this
software

1) Copy the ASPI manager from the disk provided with your
SCSI card to your hard drive.

2) Add the device driver line to the CONFIG.SYS file using
the following syntax:

DEVICE=C:\xxxx.SYS

where xxxx indicates the name of your ASPI manager.

3) Reboot the system before you start the installation.

While the system is rebooting, you should look for
status messages from the ASPI manager. If the status
indicates an unsuccessful installation, the device driver
won't function.

Matth79 wrote:
So far, an old corelSCSI that has PEL800.SYS
ftp://humboldt.sysbot.biologie.uni-muenchen.d … Coreldrv_MO.16/

How did you find this?

~ At least it can do black and white~

Reply 4 of 4, by Stiletto

Posted on 2014-06-24, 01:10

Stiletto Offline

Rank l33t++

Rank: l33t++
Posts: 5133
Joined: 2002-07-01, 21:57

Robin4 wrote:
Matth79 wrote:
So far, an old corelSCSI that has PEL800.SYS
ftp://humboldt.sysbot.biologie.uni-muenchen.d … Coreldrv_MO.16/

How did you find this?

Google finds the readme file you mention.
https://www.google.com/search?num=100&s ... L800"+aspi

The readme file is the third result.
ftp://humboldt.sysbot.biologie.uni-muenchen.d … O.16/README.TXT

Take the URL of the readme file and truncate it a level.
ftp://humboldt.sysbot.biologie.uni-muenchen.d … Coreldrv_MO.16/

You could keep going up a level.
ftp://humboldt.sysbot.biologie.uni-muenchen.d … ivers/CDROMDRV/
ftp://humboldt.sysbot.biologie.uni-muenchen.de/drivers/
ftp://humboldt.sysbot.biologie.uni-muenchen.de/

Pretty simple. 😀

"I see a little silhouette-o of a man, Scaramouche, Scaramouche, will you
do the Fandango!" - Queen

Stiletto

Go to top of page Go to top of page

Back to Milliways