Can you outline the differences between ISA and IDE? Is the latter simply a subset of the former? I.e. mostly data and address lines, no DRQ, IRQ? Never thought about that.

Interesting but unpractical idea.

Standard approach: EMS pages must appear as RAM in HMA, so the CPU can access it. IDE ports can only be accessed via I/O. So it wouldn't be possible.

Complicated approach: Creating a RAM device that could be connected to an IDE port may be easy, but you'll have to write a driver that:
- Reserves some space in HMA for EMS transfers.
- In the event of a EMS page change, it must copy the actual contents from the EMS frame to the IDE device, and then copy the contents from the new page (on IDE device) to RAM.
- And, of course, follow both the IDE specs and the EMS BIOS calls.

It can be done, but I guess the "standard" approach using ISA devices is simpler and faster.

root42 wrote:

Can you outline the differences between ISA and IDE? Is the latter simply a subset of the former? I.e. mostly data and address lines, no DRQ, IRQ? Never thought about that.

Well, I guess so. 😐 IDE/ATA is based on PC/AT-Bus or ISA,
but hardcoded to a single I/O port each (0x01F0-0x01F7 primary, 0x0170-0x0177 secondary).
So in case of EMS, this shouldn't be a big problem, I assume, since the EMS manager is the only
piece of software that would require "physical" access and the user applications need no further modification.
Anyway, I'm speaking under correction.
Here's a link to a manual of an "IDE-Flasher" device that connects to IDE.

Zup wrote:

It can be done, but I guess the "standard" approach using ISA devices is simpler and faster.

Thanks for you reply, Zup! 😀

The problem is, that most cheap thin clients have enough power for most DOS/Win3.x applications,
but the smaller ones often have no expansion ports. All they have is a RAM socket and a 44pin IDE port.

And to make things worse, their BIOSes are really weird and hostile. They don't allow EMM386, UMBPCI or QEMM to function,
so you'll be short on memory in DOS quite soon, despite the machine having 128MiB or more.

The machine I'm talking about in particular is a Wyse WinTerm S10 (SX0).
In fact, it's so evil to even blocks the IDE port once you boot off USB. 😁

Real-Mode DOS (MS-DOS 6.22) runs fine, however, so do old applications.
Well, aslong as you don't mess with reserved RAM regions in UMA.

This triggers a reset or crashes the typical memory managers except Himem.
- EMM286/EMS Magic also work, but have compatibility issues with certain EMS aware applications.

On the bright side, the Geode processor in itself is very compatible.

Edit: Some links.
https://www.parkytowers.me.uk/thin/wyse/s10/
https://www.parkytowers.me.uk/thin/wyse/s10/Linux.shtml

https://www.dell.com/support/article/de/de/de … -order?lang=enl

https://www.computerhope.com/forum/index.php?topic=164177.0
https://www.bios-mods.com/forum/Thread-Mod-a- … hin-client-BIOS

Any more ideas ? 😀

Would it be possible to make some sort of Lo-Tech EMS card, but for IDE/ATA ?
Or would it be possible to let a simple microcotroller or FPGA do the same work of an acient Expanded Memory Board (ISA) ?

Also, would it be possible to use DMA transfers of later PATA modes somehow ?
Thin Clients often have got PCI Bus Master stuff built-in, they're not stuck in a 286's IDE/ATA0 land. 😁

The 64KiB page frame could also be located below 640KiB if needed and speed is not the main issue.
- What I'm looking for (use case) isn't gaming only. Some old astronomy, CAD or BBS software may also find EMS useful.

Again, any ideas welcome. ^^

Ok, so here is an option that is available that will work:
1. Get a SATA RAM drive such as this:
https://www.amazon.com/ACARD-ANS-9010BA-Dynam … d/dp/B00VMS9ER4
http://www.hyperossystems.co.uk/07042003/products.htm
2. use a SATA to IDE adapter

3. Use a program to emulate LIM EMS/Expanded memory on that drive:
http://vogonsdrivers.com/getfile.php?fileid=851&menustate=0 (LIM EMS 3.2)

http://cd.textfiles.com/internetconnection/sysutil/
veum.zip (expanded memory)

http://ftp.lip6.fr/pub/pc/garbo/pc/memutil/
vram40.zip (expanded memory) - shareware version 128KB max - registered version can go up to 32MB.

Above Disc (expanded)
at Vetusware.

Turbo EMS (expanded)
v 4.01 at Vetusware.