First post, by Marco
Dear all,
I’d like to have two win95 INstalls on one partition. Reason: I often switch my mainboard between 386 and 486. Windows Hardware Profiles cannot handle this correctly.
I simply want to boot my configured System to w95 command line and then start win95 from the according directory on the disk.
Ps. Just copy the w95 folder to a second one and replace all entries in ini or cfgs with the new path?
Many thanks upfront
Ps. Yes maybe I can just try to run a second installation with different install path. I jut don’t want to loose again my w95/dos boot menu via win95a patching...
1) VLSI SCAMP 311 | 386SX25@30 | 16MB | CL-GD5434 | CT2830| SCC-1 | MT32 | Fast-SCSI AHA 1542CF + BlueSCSI v2/15k U320
2) SIS486 | 486DX/2 66(@80) | 32MB | TGUI9440 | SG NX Pro 16 | LAPC-I