Bit of a vague question.
What system are you running? DOS, Windows (which version) or, a combination of both?
Drivers are available on Vogonsdrivers - you can even use the AWE64 drivers to install, depending on your operating system.

winodws 98 drivers wont work and some drivers are in frensh
i tried the driver for creative website but windows wont exept the drivers
tried the 190mb install cd windows says i need to intsall drivers first

Try: http://www.vogonsdrivers.com/getfile.php?file … 311&menustate=0

i cant install the install cd because windows is telling me to install the drivers first than install the cd

iam going to reinstall windows and trie again

Does your PC (the BIOS) detect the Plug and Play sound card when you boot up (this is a PnP model, so your BIOS should detect it, depending on whether you have a PnP BIOS)?
What is your system specifications?

how can i tel my bios sees the card ? / pentium 3 800mhz 512mb ram /ssd/2 voodoo 2 sli /S3 Trio64 V2DX/500 watt seasonic psu
dont know wat kind of motherboard

scroeffie wrote:

i cant install the install cd because windows is telling me to install the drivers first than install the cd

Show a screenshot of that message, please.

give me a moment iam reinstalling windows 98

so i need to install the drivers first for my sounblaster 32 ct 3620 but where are they ?

oke windows sees the creative vibra 16 card ! so the problem is the sounblaster ct 3620 < seller told me it worked 100%

Why don't you just follow the instructions that the "error" message gives you? You try to install the bundled applications, but those require the drivers to be installed already. The drivers are on the CD as well, most likely in a subdir called drivers/win9x or something.

the soundblaster 32 ct3620 has broken traces that fucker on ebay told me it was working 100% i never chekked if it had any broken traces etc wtf !
i installed a vibra card now it works oke has popping noise better than nothing

I don't see any broken traces. These are only scratches on the protective layer. Only the small spot on picture 2 where you see the copper goes deeper, but even that is not broken.

wel windows wont see the card ,i just put in the vibra card and windows sees it installed the drivers and its working perfect

scroeffie wrote:

wel windows wont see the card ,i just put in the vibra card and windows sees it installed the drivers and its working perfect

I also don't see any broken traces.

What does the front of the card look like? Are there any chips that have the legs bent or broken?

Did you actually ever try to install the actual drivers for the SB32?

It is not going to be detected exactly like a Vibra 16 card.

You may need to run the diagnose program from within DOS to set the PnP configuration to work with your computer.

i tried to install these drivers sbw9xup.exe
Bestandsgrootte : 311,97 KB Downloaden
Details weergeven
Releasedatum : 13 nov 98
Full duplex Sound Blaster 16/32/AWE Driver Updates for Windows 95/98 SDR-95UPD-1-US (Revision 16 / but i could not because windows was not showing the souncard
dont know how to install them via dos

see pic

Being a PnP card, if Windows does not detect the card upon start up, then there is probably something wrong with the card.
You could also try to detect the card via the Add New Hardware wizard within Windows.
If no luck, then I would return the card to the seller and request a refund.

scroeffie wrote:

see pic

Ok, so with the closer picture, one of those traces looks like it is cut.

That's a bummer.

It could be a really easy fix though. Maybe contact the seller and see if they will give you a partial refund if you can fix it and if not, then send it back for a full refund.