VOGONS

Search

Common searches

Tomb Raider - Brown rectangles around bushes and plants in lost valley

Topic actions

First post, by arnovdheiden

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hello all,

I was playing Tomb Raider 1 today, and in level 3, lost valley, I noticed brown rectangles and lines around all the bushes, plants, and trees in the valley. Also the broken pieces of bridge laying on the floor are super glitchy when you walk by it.
I am using a diamond monster 3d in combination with a tnt2 m64 pci in a pentium 200 non mmx system.
I was using diamond driver 1.08 on this card, and upgrading to 1.10 didnt change anything.
I started googling to address this issue, but i couldnt find specific topics about the same issue.

I am posting this in software, but it could also be a problem with the video hardware.

Hopefully some of you can help me 😀

best regards, Arno

Reply 1 of 6, by Gmlb256

Posted on 
User metadata
Rank l33t
Rank
l33t

Hello.

For the brown rectangles and lines, have you disabled mipmapping in the menu options? It has issues with the 3dfx version when it is enabled.

VIA C3 Nehemiah 1.2A @ 1.46 GHz | ASUS P2-99 | 256 MB PC133 SDRAM | GeForce3 Ti 200 64 MB | Voodoo2 12 MB | SBLive! | AWE64 | SBPro2 | GUS

Reply 2 of 6, by arnovdheiden

Posted on 
User metadata
Rank Newbie
Rank
Newbie
Gmlb256 wrote on 2023-08-27, 16:17:

Hello.

For the brown rectangles and lines, have you disabled mipmapping in the menu options? It has issues with the 3dfx version when it is enabled.

Hello, i had it enabled. But i will test this. Thank you!

Reply 4 of 6, by Gmlb256

Posted on 
User metadata
Rank l33t
Rank
l33t

Another thing that you could do is to disable anti-aliasing, which is done by pressing the F3 key. This would remove outlines on certain polygons.

VIA C3 Nehemiah 1.2A @ 1.46 GHz | ASUS P2-99 | 256 MB PC133 SDRAM | GeForce3 Ti 200 64 MB | Voodoo2 12 MB | SBLive! | AWE64 | SBPro2 | GUS

Reply 5 of 6, by arnovdheiden

Posted on 
User metadata
Rank Newbie
Rank
Newbie
Gmlb256 wrote on 2023-08-27, 18:08:

Another thing that you could do is to disable anti-aliasing, which is done by pressing the F3 key. This would remove outlines on certain polygons.

Good advice, thank you. Will try 👍🏻

Go to top of page Go to top of page
Back to Software
Close window
Close window