VOGONS

Search

Common searches

Startup screen issue after installing Win98 unofficial SP3

Topic actions

First post, by xtreger

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hi and a very happy new year to all of you. I recently installed unofficial sp3 on my Win98 computer like so (with a reboot between every step):

clean Win98 install
install all hardware drivers
install MSI installer (InstMsiA)
install VB 6.0 runtime files (Visual Basic 6.0 with Visual Studio 6.0 Service Pack 5 Run Time Files)
install vc_6.0_redist_x86.exe
install IE6 SP1
install U98SESP3.63 (unofficial Win98 service pack 3.63) - core files only
install U98SESP3.66 (unofficial Win98 service pack 3.66) - core files only
install U98SESP3.66 (unofficial Win98 service pack 3.66) - DX9 only
install U98SESP3.66 (unofficial Win98 service pack 3.66) - performance tweaks only
install U98SESP3.66 (unofficial Win98 service pack 3.66) - enable DMA on all IDE drives
The issue is that after step 8 (I think), the windows 98 startup routine kinda got screwed over. I get a weird error screen about invalid setting in msdos.sys file, and then the win98 startup screen is partially cut out at the top.

How do I get rid of this behavior? Or how do I prevent this behavior while still installing all the above stuff? Would really appreciate any help..

Attachments

  • IMG_0964.jpg
    Filename
    IMG_0964.jpg
    File size
    85.17 KiB
    Views
    331 views
    File license
    Public domain
  • IMG_0962.jpg
    Filename
    IMG_0962.jpg
    File size
    28.85 KiB
    Views
    332 views
    File license
    Public domain

Reply 1 of 4, by Repo Man11

Posted on 
User metadata
Rank Oldbie
Rank
Oldbie

My experience with the Windows 98 "Service pack" was not good, and absent any compelling reason to try and make it work, I've never again bothered. I recommend this guide: Generic Win98SE Installation & Setup Guide

"I'd rather be rich than stupid" - Jack Handey

Reply 2 of 4, by dominusprog

Posted on 
User metadata
Rank Member
Rank
Member
Repo Man11 wrote on 2024-01-05, 17:17:

My experience with the Windows 98 "Service pack" was not good, and absent any compelling reason to try and make it work, I've never again bothered. I recommend this guide: Generic Win98SE Installation & Setup Guide

I had the same experience with the "service pack". It messes up everything.

Duke_2600.png
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Aztech Pro16 II-3D PnP ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!

Reply 3 of 4, by 1541

Posted on 
User metadata
Rank Member
Rank
Member

Unfortunately, the English version is very bloated by now, so you would be better off using an earlier version or even version 2.x by the original author "Gape/ Alper Coskun":
https://web.archive.org/web/20100206184838/ht … net/98sesp.html

This may be the culprit in your case:

install U98SESP3.63 (unofficial Win98 service pack 3.63) - core files only
install U98SESP3.66 (unofficial Win98 service pack 3.66) - core files only

Why did you install the core files twice which different versions of the SP?

You should try sticking with 3.63 and omit 3.66 completely.

💾 Windows 9x resources (drivers, tools, NUSB,...) 💾

Reply 4 of 4, by Tiido

Posted on 
User metadata
Rank l33t
Rank
l33t

The 3.xx versions replace a lot of stock 9x files with ones from later windowses and it causes various incompatibility issues. 2.x and 3.0x do not do that and are going to work a whole lot better.

T-04YBSC, a new YMF71x based sound card & Official VOGONS thread about it
Newly made 4MB 60ns 30pin SIMMs ~
mida sa loed ? nagunii aru ei saa 😜

Go to top of page Go to top of page
Back to Software
Close window
Close window