Hi, may I ask if the Windows drivers for your Sound Blaster 16 are installed ?
If so, you can check and correct the driver settings manually.
To do so, either run SYSEDIT in Windows or open SYSTEM.INI in a text editor.
(The highlighted parts are the most important ones.)
Then, watch out for the [sndblst.drv] section. It's usually near the end of the file:
[sndblst.drv]
Port=220
Int=7
DmaChannel=1
MidiPort=330
HDmaChannel=5
FDMAPlayBack=0
FDMARecording=0
VoiceVolume=16, 16
FMVolume=16, 16
CDVolume=16, 16
LineVolume=16, 16
MicVolume=16
MasterVolume=16, 16
SpeakerVolume=16
MuteVirtual=10
OutputMixerSwitch=6
BassTone=16, 16
TrebleTone=16, 16
RecordGain=1, 1
OutputGain=1, 1
AGC=0
Mux_WaveIn=1e
Also important are the driver them selves. Make sure they are listed, too.
[drivers]
timer=timer.drv
midimapper=midimap.drv
VIDC.CVID=iccvid.drv
VIDC.MSVC=msvidc.drv
VIDC.IV32=ir32.dll
VIDC.IV31=IR32.dll
VIDC.IV41=IR41.dll
VIDC.MRLE=MSRLE.drv
VIDC.RT21=ir21_r.dll
VIDC.YVU9=ir21_r.dll
WaveMapper=msacm.drv
MSACM.msadpcm=msadpcm.acm
MSACM.imaadpcm=imaadpcm.acm
DCI=display
vids.draw=udh.dll
Midi=sb16fm.drv
Midi1=sb16snd.drv
Wave=sb16snd.drv
Aux=sb16snd.drv
Mixer=sb16snd.drv
Joystick=IBMJoy.drv
(Joystick driver is optional)
[mci]
WaveAudio=mciwave.drv
Sequencer=mciseq.drv
CDAudio=mcicda.drv
AVIVideo=mciavi.drv
QTWVideo=C:\WINDOWS\SYSTEM\MCIQTW.DRV
Good luck! 😀
"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel
//My video channel//