wrote:Nothing outside of pure DOS will probably really work for the emulation of a DAC through FM synthesis
CMI8738 supposedly works in MS-DOS, although I suspect that mostly applies to the earlier versions.
My understanding is that PCM is dodgy where OPL3 via 0x388 is generally fine. Not an expert, though.
All hail the Great Capacitor Brand Finder
wrote:wrote:Nothing outside of pure DOS will probably really work for the emulation of a DAC through FM synthesis
CMI8738 supposedly works in MS-DOS, although I suspect that mostly applies to the earlier versions.
Well I have been trying to get my other sound card the AW840 (CMI8738 chipset) working and just cant get it to work in dos!
Hmmm, could also be the motherboard's fault.
I have an Abit SL10T (815 motherboard with Tultian CPU support) board here and it refuses to do any sort of PCI dos sound card emulation, except for vortex cards.
You will need to try with a different card to see.
wrote:Hmmm, could also be the motherboard's fault.
I have an Abit SL10T (815 motherboard with Tultian CPU support) board here and it refuses to do any sort of PCI dos sound card emulation, except for vortex cards.
You will need to try with a different card to see.
Possibly but I did try the AW840 (CMI8738 chipset) in another machine it still didnt work but I noticed instead of IRQ:5 it had it as IRQ:A when it was loaded in dos besides the Autoexec saying IRQ:5, not sure if that was a reason why not working.
wrote:Hmmm, could also be the motherboard's fault.
I have an Abit SL10T (815 motherboard with Tultian CPU support) board here and it refuses to do any sort of PCI dos sound card emulation, except for vortex cards.
You will need to try with a different card to see.
Have you tried Fortemedia FM-801 cards? They work flawlessly for me on 815/E/EP boards. They sound a million times better as well.
Here are FM-801 recordings I made on a Compaq i815EP board:
https://soundcloud.com/user-470084971/sets/te … 01-fm-synthesis
wrote:wrote:Just one question - There is no Ensoniq drivers for Windows 3.11, right? Because VMWare Fusion on macOS does not have SB16 emulation (but does emulate some kind of Ensoniq). Virtualbox does have SB16, but the sound is crackling. This is why I am still using it with DOSBox.
Thanks, but unfortunately they don't work with WFWG 3.11 under VMWare Fusion on macOS. I have set the VM to use ES1371 instead of SB16 (editing the VMX file), and when I run the install, it does not detect any soundscape device so the install cannot continue. Was worth a try anyway. I'll stick with the DOSBox solution until VirtualBox fixes their SB16 crackling sound bug (It was fixed around version 5.2.x, but after 5.4.x and more recently the 6.x versions, the bug came back and was never ever fixed again, Oracle stupidly does not have interest in it).
"Design isn't just what it looks like and feels like. Design is how it works."
JOBS, Steve.
READ: Right to Repair sucks and is illegal!
Hello all:
I'm using an AudioPCI 5200 (Es1373) with the Ensoniq driver from the first post. DOS 6.22 on real hardware. However, when apinit.com is run, the system hangs forever. It gets up to here and then never proceeds. Any ideas? I know the card is good (it was working in Win 98 on this same hardware, but I want to turn this into a pure DOS machine).
Did you try to turn off PnP OS Support in the BIOS?
I have a question - how does the MIDI UART FIFO work on this? The datasheet is very unclear on this. There's 8 bytes of FIFO, but are all 8 bytes used for TX and RX together, are there 4 bytes for TX + 4 bytes for RX, or what's going on?
Typically in serial communications the FIFO is used to receive data because the CPU can plan it's time to transmit fluently, but may not be instantly ready when data starts to arrive.
Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.
captain_koloth wrote on 2021-03-06, 19:30:Hello all:
I'm using an AudioPCI 5200 (Es1373) with the Ensoniq driver from the first post. DOS 6.22 on real hardware. However, when apinit.com is run, the system hangs forever. It gets up to here and then never proceeds. Any ideas? I know the card is good (it was working in Win 98 on this same hardware, but I want to turn this into a pure DOS machine).
could be an emm error. try qemm instead.
My SB128pci shows that everything is OK under dos but I can't use it anywhere. No game/demo/soundplayer find's anything...strange.
Retro-Gamer 😀 ...on different machines
