VOGONS


DSS / Covox Speech Thing exclusive games

Topic actions

Reply 60 of 74, by bjwil1991

User metadata
Rank l33t
Rank
l33t

I have the NX Pro and NX Pro 16 and it blew my mind that it had Disney Sound Source and Covox Speech Thing integrated. I need to find the SCSI and Sony CD-ROM drive boards sometime. The NX Pro needs to get looked at, but the NX Pro 16 (bought new) is perfect in my Packard Bell Pack-Mate 28 Plus. Having Covox Speech Thing and Disney Sound Source on a sound card without buying the rare items for over $1,000 (there's a Covox to LPT available for a good price) is the frosting on the cake.

Discord: https://discord.gg/U5dJw7x
Systems from C64 to FX-6300.

Reply 61 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie

bjwil1991, do you happen to have a manual for NX Pro or NX Pro 16?
I am curious on the correct way to attach PC Speaker to the card. I can't find any information on that connector in AZTech cards unfortunately. While on Sound Blaster cards it is always designated with 'number 1' pin.

Reply 62 of 74, by bjwil1991

User metadata
Rank l33t
Rank
l33t

I can take a picture of the manual of how to connect the PC Speaker wire to the sound card.

Discord: https://discord.gg/U5dJw7x
Systems from C64 to FX-6300.

Reply 64 of 74, by bjwil1991

User metadata
Rank l33t
Rank
l33t

Not yet. I tried to connect it to my Tandy 3 voice card and nothing. Maybe because it needs the ground wire in order to get it to work.

Discord: https://discord.gg/U5dJw7x
Systems from C64 to FX-6300.

Reply 65 of 74, by matze79

User metadata
Rank Oldbie
Rank
Oldbie

I`m not sure if i posted it already..

i`m working on a Covox Sound Support List:

https://dosreloaded.de/forum/index.php/Thread … t%C3%A4tsliste/

Every title is tested.

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Co2 - for a endless Summer

Reply 66 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie

matze79, yes, you have already posted it on the previous page.
But you probably list all the games that support Covox / DSS/ MDO, while the topic is above exclusive games that support nothing except it and PC Speaker 😀

Reply 67 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie
Uka wrote:

And there are two games, 'No Exit' and the already mentioned 'Astérix: Operation Getafix' ('Astérix: Le Coup du Menhir'), which are somewhat special. The second one supports MDO ONLY in CGA mode - it is silent in VGA... And I can't get sound working in 'No Exit' even in CGA. Maybe some tweaking is possible?

OK - this problem is solved!
With 'No Exit' it was some glitch of DOSBox SVN Daum - with other forks and on real old PC the sound is there.
And with 'Astérix', in order to have MDO sound in DOSBox, all memory managers must be turned off in CONF-file: xms=false, ems=false, umb=false.

So these two games could be added to the list of Covox / DSS / MDO exclusives.

Reply 68 of 74, by matze79

User metadata
Rank Oldbie
Rank
Oldbie
Uka wrote:

matze79, yes, you have already posted it on the previous page.
But you probably list all the games that support Covox / DSS/ MDO, while the topic is above exclusive games that support nothing except it and PC Speaker 😀

Dont mind 😀
i just forgot it

Yeah i don`t know any games only supporting Covox and Speaker 😀
Thats reallly.. hard!

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Co2 - for a endless Summer

Reply 69 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie
bjwil1991 wrote:

I can take a picture of the manual of how to connect the PC Speaker wire to the sound card.

Well, I did not wait for that picture and made today a connector to try everything myself 😀

It is strange, but both ways of connecting the wire (red+black and black+red) give the same result - and neither of them is fine. The sound is very quite and noisy.

BUT - if I connect only one, the red wire from the motherboard to the upper pin of the NX Pro - then the PC Speaker sound is loud and clear!
The quality is even close to that of DSS/Covox (in applications that supports them both, like Scream Trackers or RealSound games), but 'Sound Blaster Pro' option still sounds better of course.

Reply 70 of 74, by jesolo

User metadata
Rank Oldbie
Rank
Oldbie
Uka wrote:
Well, I did not wait for that picture and made today a connector to try everything myself :) […]
Show full quote
bjwil1991 wrote:

I can take a picture of the manual of how to connect the PC Speaker wire to the sound card.

Well, I did not wait for that picture and made today a connector to try everything myself 😀

It is strange, but both ways of connecting the wire (red+black and black+red) give the same result - and neither of them is fine. The sound is very quite and noisy.

BUT - if I connect only one, the red wire from the motherboard to the upper pin of the NX Pro - then the PC Speaker sound is loud and clear!
The quality is even close to that of DSS/Covox (in applications that supports them both, like Scream Trackers or RealSound games), but 'Sound Blaster Pro' option still sounds better of course.

I happen to have bought my Sound Galaxy Basic/Pro16 new(uses the same chipset as the NX Pro 16) and it came with a speaker wire that only has a red wire.

Reply 71 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie
jesolo wrote:

I happen to have bought my Sound Galaxy Basic/Pro16 new(uses the same chipset as the NX Pro 16) and it came with a speaker wire that only has a red wire.

Ah, that's interesting!
So what's the second pin for? Does your card come with any manual?

My card is NX Pro Extra (I38-SGNXPRO), but yes, cards like NX Pro / NX Pro 16 / NX Pro 16 Extra / Pro 16 are mostly the same.

Reply 72 of 74, by jesolo

User metadata
Rank Oldbie
Rank
Oldbie
Uka wrote:
Ah, that's interesting! So what's the second pin for? Does your card come with any manual? […]
Show full quote
jesolo wrote:

I happen to have bought my Sound Galaxy Basic/Pro16 new (uses the same chipset as the NX Pro 16) and it came with a speaker wire that only has a red wire.

Ah, that's interesting!
So what's the second pin for? Does your card come with any manual?

My card is NX Pro Extra (I38-SGNXPRO), but yes, cards like NX Pro / NX Pro 16 / NX Pro 16 Extra / Pro 16 are mostly the same.

I think the second pin is for ground but, I don't think it's required when you connect the wire between your sound card and your motherboard's speaker header.
Yes, I've attached an excerpt of the part of the manual where it mentions the speaker cable.
I also have the I38-SGNXPRO (in its box with manuals) but, that one is currently tucked away in storage.

Attachments

  • Filename
    Sound Galaxy Manual.pdf
    File size
    442.49 KiB
    Downloads
    3 downloads
    File comment
    Sound Galaxy manual exceprt
    File license
    Fair use/fair dealing exception

Reply 73 of 74, by Uka

User metadata
Rank Newbie
Rank
Newbie

jesolo, thanks for the part of the manual!

It is interesting that it mentions connecting PC Speaker to 'Phone' as well.

jesolo wrote:

I think the second pin is for ground but, I don't think it's required when you connect the wire between your sound card and your motherboard's speaker header.

Yes, but why the sound becomes very bad if I connect two pins instead of just one?

Have you tried connecting PC Speaker to your card?