First post, by tpowell.ca
Rank
Member
- Rank
- Member
So I'm trying to modify my SoundBlaster Pro 2.0 card such that I bypass the amplifier on the card to get a clean(er) line level output.
The chip to bypass is the TEA2025, but the way creative labs has implemented it on this card differs wildly from the ST electronics reference designs.
Has anyone performed this mod?
Can I just tap the mixer chip CT1345?
- Merlin: MS-4144, AMD5x86-160 32MB, 16GB CF, ZIP100, Orpheus, GUS, S3 VirgeGX 2MB
Tesla: GA-6BXC, VIA C3 Ezra-T, 256MB, 120GB SATA, YMF744, GUSpnp, Quadro2
Newton: K6XV3+/66, AMD K6-III+500, 256MB, 32GB SSD, AWE32, Voodoo3