dr.zeissler wrote on 2024-01-11, 18:37:
weedeewee wrote on 2024-01-11, 16:52:Regarding that 26?pin port... does anyone have a link to the pinout ? […]
Show full quote
Regarding that 26?pin port... does anyone have a link to the pinout ?
I recently came across a siemens D1025 which had a rainbow runner card rattling in the case, and another PCI card nearby with a tuner and a 26 pin D-connector attached via an IDC connector. Luckily on top of this all was a 26 pin D-connector with a bunch of connectors and also a scart connector attached. I could measure this and post the pinout. I'm curious though if anyone else has a link to compare it to.
The d1025 mainboard is working, after adding the electrolytics back on since someone removed them which caused the board to boot and then crash.
I haven't tested the rainbow card nor the pci tuner card yet.
The thing that was missing from this all was the ISA/PCI riser that the mainboard uses. slightly frustrating.
something like this? (FSC-C5 (233mmx) D1025 onboard mystique 2MB + Rainbow-Runner on the mainboard.
yes, that seems to be the mainboard, riser, rainbow runner and a bunch of other cards in the photo you've shown.
All the electrolytics had been removed on the board I have. I only placed back 4 in total and the board is running, though I'll have to add a few more to be safe.
I'll add a photo of the pci card with cabling after I take a photo of them. Fairly certain it connects to the rainbow runner.
but that wasn't the point of my comment.
Right to repair is fundamental. You own it, you're allowed to fix it.
How To Ask Questions The Smart Way
Do not ask Why !
https://www.vogonswiki.com/index.php/Serial_port