Reply 120 of 150, by Mamba
- Rank
- Oldbie
mockingbird wrote on 2021-01-12, 19:11:I strongly recommend you underclock the memory of the FX3000 to at least 200Mhz below spec. The DDR in the FX3000 is notorious for not lasting long at stock clocks. This does not apply to Quadro 1000 and 2000 which used vastly improved DDR2.
I would advise doing this via a BIOS mod rather than through software because the card will run at stock clock until the software applies the changes, well after the boot process completes.
Have you a modded bios for me?