First post, by weldum
- Rank
- Member
Hello, I have a computer that seems not to like the crappy MX4000:
Duron 850 @ 892.5
512MB PC100
Windows XP
SiS 730S Chipset
The board is an old PCChips with the processor soldered and overclocked.
The video card is:
XFX GeForce 4 MX4000
32 bit memory bus 😵
64MB
AGP 8x, though it's running at 2x
I've tested only 2 driver revisions: 45.23 (forcing to install as MX 420) and 93.71, the first one doesn't show any image after loading windows, the other works, but with strange texture problems.
The board works well on other faster machines, and in this motherboard, an older GF2 MX400 works very good. Something that comes to mind is the overclocked FSB, but due to being impossible to change that, at least from bios, don't know of another solution.
Any ideas? Thanks
DT: R7-5800X3D/R5-3600/R3-1200/P-G5400/FX-6100/i3-3225/P-8400/D-900/K6-2_550
LT: C-N2840/A64-TK57/N2600/N455/N270/C-ULV353/PM-1.7/P4-2.6/P133
TC: Esther-1000/Esther-400/Vortex86-366
Others: Drean C64c/Czerweny Spectrum 48k/Talent MSX DPC200/M512K/MP475