Just repeating this kind request in case someone who could assist missed it the first time.. Otherwise I will just go with what I can best judge is likely to be a replacement and try the cards in a system with fingers crossed 😢

i'ts kind of sad when no one answers the question, sadly i don't have any voodoo card, let's hope someone read this thread and help you

Gainward Dragon 3000

http://vgamuseum.ru/wp-content/gallery/3dfx-v … _gainward_r.jpg

Thanks for the sympathies.. still hope someone who knows what they are doing better than me will respond.

I had the rear shot of the board linked above among others. That one has 0805 caps, mine and some others on the web have 1206; hence me thinking the storage cap is possibly 1uF, a common capacitance for either size..

Bumping this thread one last time before I let it die.. I've found a lot of reference to a lot of capacitor values, but most of them are for the smaller 100nF and 10nF capacitors which I've already sorted out. The larger ones, I can't reference.. There are claims of missing 4,7uF, 1uF or 220nF capacitors from various Voodoo cards, Voodoo 2 up to Voodoo 5, but different boards have different capacitors all over. This missing cap is located behind the PixelFX chip and I think it's a storage cap on the input voltage, so I am about to go safe and slap on a 4.7 uF here.. Let's hope someone in the know will drop by and give an opinion 🙁

Don't know if it matters, but regarding the voodoo 3 - do you mean pci or agp? I may be able to look at mine and help you out.

EDIT: Just read your other thread. Let us know how it goes.

appiah4 wrote:

3dfx Voodoo 3 3000 C94: 0603 0.1uF 16V

Did you ever decide on a final value for this and did it work? I'm missing this exact one.

I am afraid noone can can easily tell what value those capacitors are. Because as far as I know the only way would be to desolder them, then measure and then solder back.