VOGONS


First post, by deadfatty

User metadata
Rank Newbie
Rank
Newbie

Hi there! I got a T&W Voodoo Graphic card with 4M RAM and drivers(3.01.00) can be installed properly. While when I running dxdiag or GLQuake, it stucked in blackscreen, no response. Both 3dfx chips are extremely hot. What should I do? Thanks!

Reply 2 of 3, by weldum

User metadata
Rank Member
Rank
Member

i suppose that you're using the Y cable that goes from the 2D to the voodoo, and then the monitor in the voodoo

DT: R7-5800X3D/R5-3600/R3-1200/P-G5400/FX-6100/i3-3225/P-8400/D-900/K6-2_550
LT: C-N2840/A64-TK57/N2600/N455/N270/C-ULV353/PM-1.7/P4-2.6/P133
TC: Esther-1000/Esther-400/Vortex86-366
Others: Drean C64c/Czerweny Spectrum 48k/Talent MSX DPC200/M512K/MP475