Need help figuring out some missing components on a Gainward Dragon 3000 Voodoo 2 card \ VOGONS

Need help figuring out some missing components on a Gainward Dragon 3000 Voodoo 2 card

Topic actions

Post a reply

First post, by elloowd

Posted on 2021-03-31, 16:06

elloowd Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2021-03-31, 15:24

So i bought this card and only after receiving it i noticed it had some missing components (3 polymer capacitors and 1 resistor). Luckily from the images on the web i can tell that all the caps on the board are the same, and the missing resistor has a value.
So my questions are as follows:

1. How do i read the value on these caps (i tried to look it up on the net, but different manufacturers have different markings)

2. What is the value on R26. From the image at hw-museum.cz i think it could be 182 or 152 so if anyone could confirm that it would be great.

Attachments

Filename

IMG_20210331_184204.jpg

File size

1.78 MiB

Views

296 views

File comment

Missing resistor

File license

CC-BY-4.0
Filename

IMG_20210331_185621.jpg

File size

760.5 KiB

Views

296 views

File comment

Capacitor

File license

CC-BY-4.0

Reply 1 of 5, by weedeewee

Posted on 2021-03-31, 17:12

weedeewee Offline

Rank l33t

Rank: l33t
Posts: 2949
Joined: 2021-01-31, 16:09
Location: Belgium

22µF 16v for the capacitors
and 182 or 152 is 1800 or 1500 ohms

I think that was it.

Right to repair is fundamental. You own it, you're allowed to fix it.
How To Ask Questions The Smart Way
Do not ask Why !
https://www.vogonswiki.com/index.php/Serial_port

Reply 2 of 5, by Doornkaat

Posted on 2021-03-31, 20:39

Doornkaat Offline

Rank l33t

Rank: l33t
Posts: 2328
Joined: 2017-04-02, 06:50

You're in luck, I just had my Gainward V2 out today so I could look it up: R26 is marked 102 on my card, making it a 1k Ohm resistor.👍
Edit: Welcome to the forum btw. Feel free to post pics of your build!😃

Reply 3 of 5, by elloowd

Posted on 2021-04-01, 15:26

elloowd Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2021-03-31, 15:24

weedeewee wrote on 2021-03-31, 17:12:

22µF 16v for the capacitors
and 182 or 152 is 1800 or 1500 ohms

I think that was it.

Doornkaat wrote on 2021-03-31, 20:39:

You're in luck, I just had my Gainward V2 out today so I could look it up: R26 is marked 102 on my card, making it a 1k Ohm resistor.👍
Edit: Welcome to the forum btw. Feel free to post pics of your build!😃

Thanks for all the help, will post an update once i get the parts.

Reply 4 of 5, by elloowd

Posted on 2021-05-05, 18:19

elloowd Offline

Rank Newbie

Rank: Newbie
Posts: 3
Joined: 2021-03-31, 15:24

Update: So i got my parts and got around to operating on my card.

My soldering iron is pretty crappy so i expected the result to be worse than it was so i was pleasantly surprised. Will it work though, only one way to find out.

Video signal passed trough first try, and the drivers installed correctly so i consider this a success (and a good one at that for 60 euro)