VOGONS

Search

Common searches

SiI 0680 stuck on redirecting INT 13h

Topic actions

First post, by Santyago

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hi!

I'm trying load DOS drivers for SiI 0680 IDE controller (PCI). Work fine under Windows, but when i'm loading DOS (6.22 / 7.1) driver SII860.SYS stuck on message "Redirecting INT 13h for drivers 80h-81h.". I'm use ga-5ax mobo and i'm trying lot bios settings. Does anyone work? No matter than hdd is plugged or not to controller, above message always shown and stuck.

I'm trying also plug CD DROM and use SII860CD.SYS for CD-ROM drive and this fork fine with mscdex.

Maybe exists another IDE PCI controller work fine under DOS?

Reply 1 of 2, by Sphere478

Posted on 
User metadata
Rank l33t++
Rank
l33t++

That’s weird, cause I use this in dos and it seems to work fine,

AAC11F04-3A20-4443-9D82-44831E8647E0.png
Filename
AAC11F04-3A20-4443-9D82-44831E8647E0.png
File size
57.56 KiB
Views
416 views
File license
Public domain

Though I’ve never tried installing to it, just booting from it. I usually load the cards on a modern computer and boot the card.

I believe it is based on the same chipset.

Pretty sure I have tried it on my gigabyte ga-5aa which is a similar mobo

I know that trying to use my ide sil0680 card (with ide ports) was buggy last time I tried to use it with a DOM

I usually use a promise sata II tx4 for most of my builds where actual drives are used.

Sphere's PCB projects.
-
Sphere’s socket 5/7 cpu collection.
-
SUCCESSFUL K6-2+ to K6-3+ Full Cache Enable Mod
-
Tyan S1564S to S1564D single to dual processor conversion (also s1563 and s1562)

Go to top of page Go to top of page
Back to DOS
Close window
Close window