VOGONS


WTB: 5 1/4 PC floppy drive

Topic actions

First post, by Amigaz

User metadata
Rank Oldbie
Rank
Oldbie

Anyone have a spare 5 1/4 you can part with? seems like it's like finding a needle in a hayestack is easier than finding one here 😒

My retro computer stuff: https://lychee.jjserver.net/#16136303902327

Reply 1 of 27, by general_vagueness

User metadata
Rank Member
Rank
Member

needle in a haystack: about an hour to 5 hours, with modern technology
5¼" floppy drive: about a day to 10 days, going through every Salvation Army or Goodwill place you can find
I had one, in fact I had two, but you're about four years too late. I'm typing this from my Computer Specialist class, the teacher of which has several, so I know they're still out there, and I can't very well say "Hey, this guy wants a 5¼" floppy drive, could you give him one?", and to be completely honest I would probably keep any 5¼" floppy drive I found for myself, because they're so hard to find.
Do you live in the U.S.? If so, I would go through Salvation Army and Goodwill places; I'm not sure if they call them stores, and I'm not sure about other countries. Other than that, I'd say be patient and keep hoping one shows up on eBay.
I think I heard once about a company that sells old PC hardware like that, but I'm really not sure at all; maybe you can find it, if it exists.
Good luck! 😀

You cannot fall off the floor.
If you look hard enough, you'll find something you don't like.

How to ask questions the smart way
How to become a hacker
How to answer smart-alec questions

Reply 3 of 27, by h-a-l-9000

User metadata
Rank DOSBox Author
Rank
DOSBox Author

I almost drown in them xD (but I'm lazy)

1+1=10

Reply 4 of 27, by jthieme

User metadata
Rank Newbie
Rank
Newbie

If I'm reading this right, it looks like a 10pk of 5.25" floppy drives for about $50 plus shipping:

http://www.amazon.com/10PK-5-25-1-2MB-Floppy- … e/dp/B0000DCK7T

Not that you need 10 but you could always ebay the rest if they are that hard to find. Or maybe you can contact them and see if they will sell you just 1. They should be all over ebay too, I recently bought a Teac FD-505 combo 3.5/5.25 inch floppy off ebay and I still see listings out there for those as well.

I.e. here are some listings that I found quickly:

http://computers.search-desc.ebay.com/5-25_Ot … gZ1QQsofocusZbs

Reply 5 of 27, by swaaye

User metadata
Rank l33t++
Rank
l33t++

I recently tossed a sweet combo 5.25/3.5" drive. 😀 I haven't touched a 5.25" floppy for about 10 yrs...

Reply 6 of 27, by general_vagueness

User metadata
Rank Member
Rank
Member

"tossed"? as in "threw away"? please tell me that's not what you meant, because I would keep such a thing my whole life just for the historical value; for other reasons too, but the historical value would be enough, like owning an original Macintosh or something
yeah, apparently there are a bunch of them for sale, some at reasonable prices, some not
I assumed that posting this here meant he (she?) had already checked eBay and the other likely places. However, he said "[one] you could part with", which is roughly what I say when I'm trying to say I want something for free. Honestly, if I had a few (more than 3), I'd give you one but make you pay for the shipping.

You cannot fall off the floor.
If you look hard enough, you'll find something you don't like.

How to ask questions the smart way
How to become a hacker
How to answer smart-alec questions

Reply 7 of 27, by swaaye

User metadata
Rank l33t++
Rank
l33t++

Actually I dropped it off at a recycling place. 😁 It came with a Gateway 2000 Pentium 90 that I found in a giveaway pile at my university years ago. I used it for years but decided to get rid of some of my excessive retro collection and tossed that whole baby AT desktop case with the drive still inside.

Years ago I copied all contents of any 5.25" disks that I still wanted to have to my hard drive and a backup CD. I haven't even seen a 5.25" disk in years, let alone used one.

I am amazed that they would be hard to find on ebay though. Might just need to buy a old machine. 😀

Reply 8 of 27, by Kreshna Aryaguna Nurzaman

User metadata
Rank l33t
Rank
l33t

I got few 5.25", but they just don't work anymore. Is it possible to repair them? When floppy drive do not recognize inserted disks anymore, what component needs to get fixed/replaced?

Never thought this thread would be that long, but now, for something different.....
Kreshna Aryaguna Nurzaman.

Reply 10 of 27, by Jorpho

User metadata
Rank l33t++
Rank
l33t++
general_vagueness wrote:

"tossed"? as in "threw away"? please tell me that's not what you meant, because I would keep such a thing my whole life just for the historical value; for other reasons too, but the historical value would be enough, like owning an original Macintosh or something

I suppose you keep 8-track cassette players too? 🤣

Reply 12 of 27, by Amigaz

User metadata
Rank Oldbie
Rank
Oldbie

I think I've found some in my own conutry (Sweden) with the help of some guys at a swedish Amiga forum

I have some games that are on 5.25 disks...otherwise I could have cope without this floppy drive

My retro computer stuff: https://lychee.jjserver.net/#16136303902327

Reply 13 of 27, by general_vagueness

User metadata
Rank Member
Rank
Member

I'm glad to hear it and once again good luck.

Jorpho wrote:

I suppose you keep 8-track cassette players too? 🤣

no, I don't have any 😉

but really, if you had, say, a drawing by done a famous artist before the artist was famous, you would keep it, even if it sucked, right? kind of the same idea

You cannot fall off the floor.
If you look hard enough, you'll find something you don't like.

How to ask questions the smart way
How to become a hacker
How to answer smart-alec questions

Reply 14 of 27, by Dominus

User metadata
Rank DOSBox Moderator
Rank
DOSBox Moderator

I still have one in my mothers basement (around 700km away from here). LAst time I used it to just quickly copy my last 5 1/4 floppy disk game and that was that. I wouldn't give it away but I'm not sure whether I will ever have use for it anymore 😀
Funnily, I grew up with a C64 but between my C64 time and my PC time some years were in between. When I bought my first PC I was very strict on having a 5 1/4 drive (even though it was already an out of use hardware piece mostly) because I thought with a C64 emulator I could read my C64 floppies with this drive 😀
Didn't take me too long to recognize my error 😀
In the end I bought a LPT adapter to hook up my old C64 drive and copy my C64 disks that way 😀 (that drive is also in my mothers basement)

Windows 3.1x guide for DOSBox
60 seconds guide to DOSBox
DOSBox SVN snapshot for macOS (10.4-11.x ppc/intel 32/64bit) notarized for gatekeeper

Reply 15 of 27, by general_vagueness

User metadata
Rank Member
Rank
Member
Kreshna Aryaguna Nurzaman wrote:

I got few 5.25", but they just don't work anymore. Is it possible to repair them? When floppy drives do not recognize inserted disks anymore, what component needs to get fixed/replaced?

I haven't exactly fixed floppy drives before, but I have definitely troubleshooted (troubleshot?) several of them, and taken apart several working and broken 3½ and 5¼ inch drives (once all the way down to taking apart the motor), so I might be able to help, it could be a very simple mechanical problem, but trans-oceanic shipping rates... ooh 🤑 😵
if you can afford, I'd be happy to look at them for free (I'm bored)

Last edited by general_vagueness on 2008-02-27, 14:50. Edited 1 time in total.

You cannot fall off the floor.
If you look hard enough, you'll find something you don't like.

How to ask questions the smart way
How to become a hacker
How to answer smart-alec questions

Reply 16 of 27, by leileilol

User metadata
Rank l33t++
Rank
l33t++

I have a few, but they all suffer rust damage :[

apsosig.png
long live PCem

Reply 17 of 27, by Kreshna Aryaguna Nurzaman

User metadata
Rank l33t
Rank
l33t
general_vagueness wrote:

I haven't exactly fixed floppy drives before, but I have definitely troubleshooted (troubleshot?) several of them, and taken apart several working and borken 3½ and 5¼ inch drives (once all the way down to taking apart the motor)

I see. I actually have two hi-density (1.2MB) 5.25" floppy drives. One cannot read hi-density 5.25" floppies anymore, although it can still read 360KB floppies. The other, well, it just refuses to recognize any floppies being inserted.

Wonder if they can still get fixed. Does 5.25" floppy drive have the same head with 3.5" drives? If it's the head that gets damaged, how hard it is to find replacement part?

Never thought this thread would be that long, but now, for something different.....
Kreshna Aryaguna Nurzaman.

Reply 18 of 27, by general_vagueness

User metadata
Rank Member
Rank
Member

no, it has a larger head with the inductors (or whatever they're called) larger and farther apart; getting just a head would be hard, not only because of age, interest, etc., but because it's the most important part
there is a little hole that indicates density on 5¼" floppies, the sensor that detects it is probably broken or misaligned (not lined up with where the hole is)
as far as not detecting a disk at all, all 5¼" FDDs that I know of have a door or latch of some kind, a mechanism that must be closed for the drive to work, and also signals the mobo that there is a disk in the drive, so that might be broken
I think (I'm not sure) that with advanced electronics you usually hope it's a mechanical problem and not electronic, because mechanical problems can be fixed in many ways, but usually electronic problem ==> replace a chip, which usually isn't worth it, as in cheaper or easier to replace the whole thing

You cannot fall off the floor.
If you look hard enough, you'll find something you don't like.

How to ask questions the smart way
How to become a hacker
How to answer smart-alec questions

Reply 19 of 27, by 5u3

User metadata
Rank Oldbie
Rank
Oldbie

The heads in floppy drives are usually quite robust, in most cases it is not the head that causes an old floppy drive to fail.
It could be a simple sensor problem, as general_vagueness mentioned, but the most common issue with old drives seems to be misalignment of the head positioning mechanics/electronics. This can be fixed on some of the (very expensive) early brand name drives, however you'll need advanced equipment, a bit of knowledge, and probably much time to do this.
Later models can't be readjusted, because they were designed to be mass-produced cheaply, and the user was expected to buy a new drive when the old one "went out of whack".
So, if you've got a sturdy TEAC built in 1985, it might be worth repairing, but don't waste your time on a wobbly Mitsumi from 1992... 😉