Power Adapter for Roland CM-500 \ VOGONS

Power Adapter for Roland CM-500

Topic actions

Post a reply

First post, by CosmoJoe

Posted on 2009-05-15, 17:58

CosmoJoe Offline

Rank Newbie

Rank: Newbie
Posts: 11
Joined: 2009-04-22, 12:54

Greetings! I'm looking for some info here from owners of a Roland CM-500. I just picked one up but it doesn't have the power adapter with it 🙁

I did some research and was pointed to the following adapter from Roland:
http://shop.rolandus.com/product/part_number= … 0.24376.0.0.0.0
I was told by the owner that I need 9V DC 1000mA Roland ACB,ACK. Looking for some verification by someone with the hardware in hand 😀

Thanks in advance!

Reply 1 of 2, by Cloudschatze

Posted on 2009-05-16, 02:13

Cloudschatze Offline

Rank Oldbie

Rank: Oldbie
Posts: 1401
Joined: 2005-06-16, 14:32

CosmoJoe wrote:
I was told by the owner that I need 9V DC 1000mA...

The information is correct. Since it's stated that the PSB-1U you linked to replaces the ACB/ACK, it ought to work just fine.

Cheaper alternatives can be found at Radio Shack, or elsewhere - just make sure to get the polarity right (negative tip, positive sleeve).

Reply 2 of 2, by QBiN

Posted on 2009-05-24, 16:12

QBiN Offline

Rank Oldbie

Rank: Oldbie
Posts: 500
Joined: 2005-01-14, 19:18
Location: Mêlée Island

Also, if you have an old Sega Genesis laying around, the AC adapters that came with them are the same spec and physical plug dimensions as Roland's.

I came across that one by luck and know that it works. 😮

Go to top of page Go to top of page

Back to PC Emulation

Main menu

Common searches