First post, by Scythifuge
Rank
Oldbie
- Rank
- Oldbie
Greetings,
Does anyone have the real board or built a VM with it under 86box and figured out a way to get the cdrom installed on the secondary master IDE? It sees the cdrom if it is a primary slave, or if it is a secondary slave to a secondary master, but not if the drive is on the secondary master channel. I wonder if there is an address/irq solution under 86box or using the /p switch. I'm coming from a physical Zida 4DPS where I had a DVD-ROM on the secondary IDE channel as a master.
Scythifuge