First post, by RockstarRunner
Hi everyone,
I have a board with an ISA slot, but without any pin on the psu connector (industrial type, similar to AT, but not quite) for -5V, or a spare ISA slot to add one of those card adapters that adds -5V.
My question is, can I take -5V directly from my PSU, and connect it to the B5 pin on ISA? Is it safe, or do I need something inline with that?
(In case anyone asks: psu has -5V line, I have a card that needs -5V, and there is no separate header on the main board to give -5V)