First post, by kenan83
Hello everyone. I have a yd-380b 5.25 floppy drive. I also have a 3.5 inch floppy drive in my system. I advertise 3.5 inch 1.44mb master and 5.25 as 1.22 slave to the system. While the system is booting, it first checks 3.5, then 5.25. No problem here, just. When I try to switch from drive A to drive B, the 5.25 drive light comes on but the head does not move. While the system is booting, the reader head moves back and forth when 5.25 is marked. It looks like a capacitor is broken on the motherboard on the 5.25 floppy. Could this be the reason? Or is there another problem? I used 360kb DS, DD disks and 1.2m high density disks. Floppy disks from the 90's. Doesn't read any of them. The drive light is on and the disc is spinning. Formatting the Omnidisk. But I can't get into the disk. I tried the jumper settings on it but still the same result. What other adjustments can I make?Thank you very much for your help.