Reply 60 of 92, by Dubinius
- Rank
- Newbie
Hi h-a-l-9000 and PCBONEZ,
thank you both for the technical details about the "Off Topic" Euro PC.
The Problem is, the Euro PC II need a DC Power Supply of 18-19 Volts at 2,5 Amps. So i think i need a DC Step Up Voltage Converter to transform 12 Volts from a AT Power Supply to powering the ISA Backplane AND this little tiny PC (And have some basic Load at the 12V Line perfectly) into 18-19 Volts and make a S-VHS Adapter to fit in the Power Connection of the Euro PC II (The PC I use another Power Jack) and take a little Fuse at 3 Amps, ... But isn't it a Problem with the 12 Volts drawback in the ISA Slot ? Because i filling 18-19 Volts into the DC Jack of the Euro PC II, it had a internal DC Power Supply to transform this into the Standard PC Voltages and thus the ISA Bus getting its 12 Volts out and because the ISA Backplane is powered and also the ISA Bus is connected with the Euro PC II so 12 Volts going also into the ISA Slot, and 12 Volts going also getting out and somethings crashed 😊
Hmm, ... I think this would make a new Topic because this is Off Topic here. But this is going a way to bit off topic and sorry for that. But the Idea for the ISA Connectors of jwt with the Jumpers to cut off the Power Rails from the Board isn't a bad idea.
Anyway, Thanks for the Anwers.
Greetings