VOGONS


First post, by MatthewBrian

User metadata
Rank Member
Rank
Member

Anyone knows how to set up networking on Windows 98SE?

At the moment it is connected by Realtek RTL8139 network card, with a static IP (192.168.1.4).

WinIpCfg shows the correct configuration (IP 192.168.1.4, Default Gateway 192.168.1.1). The router's address is 192.168.1.1.

On Welcome to Windows I selected "connect to internet via LAN", but IE still shows "can't find server".

Could you give me a suggestion?

Reply 1 of 7, by SquallStrife

User metadata
Rank l33t
Rank
l33t

Did you configure the DNS server?

Try opening up a command prompt and typing "ping www.google.com"

If it can't resolve the name, there's your problem.

VogonsDrivers.com | Link | News Thread

Reply 2 of 7, by MatthewBrian

User metadata
Rank Member
Rank
Member

Yes. I tried to configure the DNS to my ADSL company DNS (the same DNS with my other computers on the same network), but it still can't connect.

Reply 3 of 7, by SquallStrife

User metadata
Rank l33t
Rank
l33t

So it doesn't resolve names?

What about setting the DNS server to your router's IP? Most routers do DNS forwarding.

VogonsDrivers.com | Link | News Thread

Reply 4 of 7, by MatthewBrian

User metadata
Rank Member
Rank
Member
SquallStrife wrote:

So it doesn't resolve names?

What about setting the DNS server to your router's IP? Most routers do DNS forwarding.

Perfect! Now I'm typing this message on the 98SE box after setting the DNS to the router.

Thank you for all of your suggestions 😀

Reply 5 of 7, by swaaye

User metadata
Rank l33t++
Rank
l33t++

I'm surprised that DHCP didn't work.

Reply 6 of 7, by RogueTrip2012

User metadata
Rank Oldbie
Rank
Oldbie

Hmmm, op doesn't say he even tried that. I wonder if he wanted a static IP for port-forwarding or firewall reasons? Maybe DHCP was to slow?

> W98SE . P3 1.4S . 512MB . Q.FX3K . SB Live! . 64GB SSD
>WXP/W8.1 . AMD 960T . 8GB . GTX285 . SB X-Fi . 128GB SSD
> Win XI . i7 12700k . 32GB . GTX1070TI . 512GB NVME

Reply 7 of 7, by MatthewBrian

User metadata
Rank Member
Rank
Member

Actually DHCP works, but I prefer to say it as 'static IP' because I arranged my own DHCP table at the router, so this MAC address would connect with this IP address, and so on. But it's a weird thing that Win98 doesn't pull the DNS information (whereas NT4 and later do).