No legacy SB16 mode with Audigy 2 (sb0240)? \ VOGONS

No legacy SB16 mode with Audigy 2 (sb0240)?

Topic actions

First post, by Doppler

Posted on 2016-08-24, 05:29

Doppler Offline

Rank Member

Rank: Member
Posts: 123
Joined: 2016-08-04, 06:01

Hi,

Yesterday I put an Audigy 2 (sb0240) on my Conroe865PE/Windows98 and unfortunately it doesnt install with the Legacy SB16 Driver. I have the official driver CD from Vogons repository. First off I installed normaly from CD Setup - this gave me WDM drivers (without legacy mode of course). Then I uninstalled the wdm drivers manually with CTZAPXX, rebooted, and installed VXD with the same CTZAPXX app - still no SB16 legacy driver. The last way was removing all drivers with CTZAPXX, and install Audigy 2 by hand, pointing the paths to inf and driver folder - still no luck.

Its a litlle bit weird because there is an sb16.inf file in the driver directory 😜 Installing it manually as an additional device gives me the yellow exclamation mark in device manager and nothing happens.

Anyone has Audigy 2 sb0240 with legacy mode installed on windows 98? Help much appreciated 😁

Reply 1 of 9, by Stretch

Posted on 2016-08-24, 12:12

Stretch Offline

Rank Oldbie

Rank: Oldbie
Posts: 522
Joined: 2013-11-16, 00:57

Install the CD normally, reboot, then in the start menu there is a utility that will switch from WDM to VxD.

Do not uninstall the WDM in between, the utility will switch for you.

Also, if MS Windows throws up its own driver prompts, cancel them because Creative's utility will perform the task.

I will get the specifics later today because I'm leaving for work.

Win 11 - Intel i7-1360p - 32 GB - Intel Iris Xe - Sound Blaster G8

Reply 2 of 9, by Nipedley

Posted on 2016-08-24, 13:57

Nipedley Offline

Rank Member

Rank: Member
Posts: 115
Joined: 2016-07-12, 08:03

I had the same problem with my Audigy 2 ZS, I could never get it to work. I switched to VxD and it wasn't there, installed it manually by selecting the sb16.inf and the yellow exclamation mark as you described. I tried all sorts but could never get it sorted. I ended up swapping to an older system with an isa based sound card to avoid the headaches!

Reply 3 of 9, by PhilsComputerLab

Posted on 2016-08-24, 14:01

PhilsComputerLab Offline

Rank l33t++

Rank: l33t++
Posts: 6174
Joined: 2014-09-28, 03:33
Location: Western Australia

Stretch wrote:
Install the CD normally, reboot, then in the start menu there is a utility that will switch from WDM to VxD.

^^ The Audigy 2 ZS has a start menu entry to switch from WDM to VXD.

Also, I found that selecting full installation worked best for me 😀

YouTube, Facebook, Website

Reply 4 of 9, by Doppler

Posted on 2016-08-24, 18:39

Doppler Offline

Rank Member

Rank: Member
Posts: 123
Joined: 2016-08-04, 06:01

I surrender. Tried just everything and I only have exclamation mark. It seems there is a problem somewhere in resources distribution. When i force SB16 driver to reserve resources manualy then sometimes the exclamation mark is gone, but then there are lots of bluescreens 😁 Maybe its a mobo irq assigning problem? who knows...

Still it would be nice if someone would share a solution 😀

Reply 5 of 9, by Jorpho

Posted on 2016-08-24, 19:00

Jorpho Offline

Rank l33t++

Rank: l33t++
Posts: 8168
Joined: 2003-02-14, 19:50
Location: Canada

Have you tried disabling the parallel port in your motherboard BIOS?

Reply 6 of 9, by chinny22

Posted on 2016-08-24, 19:37

chinny22 Offline

Rank l33t++

Rank: l33t++
Posts: 5445
Joined: 2011-08-26, 12:02
Location: Australian but living in the UK for now

Try another PCI slot?

Reply 7 of 9, by Doppler

Posted on 2016-08-25, 09:21

Doppler Offline

Rank Member

Rank: Member
Posts: 123
Joined: 2016-08-04, 06:01

Yup. Every single unused port and function is DISABLED in BIOS. No LPT, no SERIAL, no onboard LAN & AUDIO. Tried it in every PCI slot with the same result. It's just weird - the card itself works flawlessly on VXD. No hangusp, no stuttering, EAX works like everything else. The one thing it lacks is this damn SB16 mode 😁

Reply 8 of 9, by Jo22

Posted on 2016-08-25, 10:27

Jo22 Offline

Rank l33t++

Rank: l33t++
Posts: 10078
Joined: 2009-12-13, 07:06
Location: Europe

Is "PnP OS=Yes" set in the BIOS ?

"Time, it seems, doesn't flow. For some it's fast, for some it's slow.
In what to one race is no time at all, another race can rise and fall..." - The Minstrel

//My video channel//

Reply 9 of 9, by Doppler

Posted on 2016-08-25, 11:56

Doppler Offline

Rank Member

Rank: Member
Posts: 123
Joined: 2016-08-04, 06:01

Have no such option. The PCIPnP Menu is very, very limited. It has only "PCI Latency Timer" set to 32 and PCI IDE BusMaster set to Enabled. Changing these options still doesnt resolve the issue.

Go to top of page Go to top of page

Back to General Old Hardware