elianda wrote:If you look at my picture the DIPs are set to OFF OFF OFF OFF which is the VGA configuration. If you doubt the settings plug a E […]
Show full quote
If you look at my picture the DIPs are set to OFF OFF OFF OFF which is the VGA configuration. If you doubt the settings plug a EGA Monitor and change DIPs to EGA config. If you get signal then this DIP config is working as well.
Be aware that some cards feature EGA/VGA monitor auto detection, so plug only EGA for this test.
You can go on if you have a IBM monochrome monitor...
In normal VGA operation with a multi-sync monitor only OFF OFF OFF OFF is relevant.
Nice... I must admit, that I was asking about the configuration options in the first place, because I have this urge to know as much as I can about hardware that I own. And if it is hard to find online. I just keep on working, untill I find it one way or another. Asking on Vogons is last resort. 😁
Anyway....
I will however only be using this card with an flatscreen monitor. The reason is that whenever I fire up an CRT monitor, my girlfriend is having a hard time. She is extremely sensitive to high pitch noises, that 90% of all people can not hear. So... When I fired up that Unisys EGA monitor that I have, she had a real hard time. I guess this will only do, when she is not at home. (she can hear it in the room next to my computers).
It's sad that she is so sensitive.... But hey... There has to be room for everyone right? 😀
Don't eat stuff off a 15 year old never cleaned cpu cooler.
Those cakes make you sick....
My blog: http://to9xct.blogspot.dk
My YouTube: https://www.youtube.com/user/brostenen
001100 010010 011110 100001 101101 110011