First post, by Agent of the BSoD
- Rank
- Member
So I just picked up a SB Pro 2 today, and I'm nothing but issues with it. I'm using a copy of the install drivers for the card on some floppies for the test using "test-sbp".
For some reason, only IRQ 7 is detected. 5, 2, and 10 all fail to be detected, which is odd considering the ISA sound card I used before this was fine on 5.
When everything does get detected using IRQ 7, only the 4 operator test works correctly. 2 operator sounds horribly distorted and lingers a note after the test finishes, even if I close the program. Digital sounds fail completely, nothing even happens when I press it.
Also, I'm still a bit confused as to how the jumpers for JP2 and JP3 are supposed to be arranged. JP2 is a whole line of 8 pins and JP3 is just two, but when I removed those jumpers, I got no audio output.
Could you guys offer any suggestions that I should try to get this thing to work?
Pentium MMX 233 | 64MB | FIC PA-2013 | Matrox Mystique 220 | SB Pro 2 | Music Quest MPU Clone | Windows 95B
MT-32 | SC-55mkII, 88Pro, 8820 | SB16 CT2230
3DFX Voodoo 1&2 | S3 ViRGE GX2 | PowerVR PCX1&2 | Rendition Vérité V1000 | ATI 3D Rage Pro