Reply 140 of 194, by lvader
I did some benchmarks of my socket 7 Pentium 233 MMX build. I have a couple of toggle switches that lets me change the FSB between 50 and 66 FSB and between 3.5 and 2.0 multiplier. I'm also using a few combinations with SETMUL to get a good spread of speeds.
Interesting that FSB has a much greater influence on slowdown compared to multipliers).
233 MHz
Speedsys / 3Dbench2
174.3 / 165.5
144.63 / 138.8 (VPD, BPD)
77.53. / 59.9 (CCD)
35.90. / 38.02 (CCD, DCD)
30.1. / 33.3 (CCD,DCD,VPD,BPD)
12.95 / 15.8 (CCD,DCD,VPD,BPD, L2 disabled)
175MHz (3.5x50)
Speedsys / 3Dbench2
131.11 / 124.3
108.77/ 104.3 (VPD, BPD)
58.30 / 45.0. (CCD)
27.0. / 28.7 (CCD, DCD)
22.56 / 25.0. (CCD,DCD,VPD,BPD)
9.70. / 11.8 (CCD,DCD,VPD,BPD, L2 disabled)
133mhz (2.0x66mhz)
Speedsys / 3Dbench2
99.62 / 128.3
82.64. / 101.2 (VPD, BPD)
67.99. / 54.0 (CCD)
33.3 / 35.8 (CCD, DCD)
25.77 / 29.7. (CCD,DCD,VPD,BPD)
12.62. /. 15.3 (CCD,DCD,VPD,BPD, L2 disabled)
100mhz (2.0x50)
Speedsys / 3Dbench2
77.91. / 96.3
62.15 / 76.0 (VPD, BPD)
51.13 / 40.5. (CCD)
25.04 / 26.8 (CCD, DCD)
19.38./ 22.3 (CCD,DCD,VPD,BPD)
9.46. / 11.4. (CCD,DCD,VPD,BPD, L2 disabled)