Welcome to the forums.

You have a pretty good system there 😁

I see you also like having lots of tabs open? 😜
It looks really clean with very basic cable management. You are missing the AT i/o shield, but those were a pain to find. Some people had reported good results using a 3D-printer, but I don't remember well enough anymore (and not everyone actually has a 3D printer).
Your Power Man PSU is really typical for a PSU during the Athlon XP era, but it would be wise to check inside the PSU for any signs of bulging caps and perhaps a dedusting. Otherwise Power Man made solid PSUs, even though I don't know that particular model.
Also keep in mind that 4x CDROM drives typically had trouble reading burned media. It went better starting at models of roughly 8x speed. How is the noise your 4x optical drive makes? I found my 2x drive to be very silent, or at least compared to the 40x decibel demons out there 🤣

What games or other programs have you tried on it yet? 😀

And welcome aboard! 😀

Welcome!
a nice and clean setup 😎
ss7 is a pain to find mobo's for at decent prices, even on the ebay and amibay (lest not forget quality ones)

Tetrium wrote:

I see you also like having lots of tabs open? :P It looks really clean with very basic cable management. You are missing the AT […]
Show full quote

I see you also like having lots of tabs open? 😜
It looks really clean with very basic cable management. You are missing the AT i/o shield, but those were a pain to find. Some people had reported good results using a 3D-printer, but I don't remember well enough anymore (and not everyone actually has a 3D printer).
Your Power Man PSU is really typical for a PSU during the Athlon XP era, but it would be wise to check inside the PSU for any signs of bulging caps and perhaps a dedusting. Otherwise Power Man made solid PSUs, even though I don't know that particular model.
Also keep in mind that 4x CDROM drives typically had trouble reading burned media. It went better starting at models of roughly 8x speed. How is the noise your 4x optical drive makes? I found my 2x drive to be very silent, or at least compared to the 40x decibel demons out there 🤣

What games or other programs have you tried on it yet? 😀

And welcome aboard! 😀

This powerman very noisy and i want to change it to hipro with 80mm fan (its much quiter). It's new, from intel server case. But hipro has only 21A on +5v rail. What do you think?
Mitsumi 4x reads CD-R well and it's very silent.

Tetrium wrote:

What games or other programs have you tried on it yet? 😀

tomb raider1-3 , quake 2, quake 3 🤣 , kingpin life of crime.
It can even play a low-resolution divx. Pentium MMX on 100fsb is very fast 😎 . I'm not sure if it makes sense to change it to k6-2 300.

Tetrium wrote:

I see you also like having lots of tabs open? 😜

Wow and on a mmx pent. I bet that's slow.

Jade Falcon wrote:

Tetrium wrote:

I see you also like having lots of tabs open? 😜

Wow and on a mmx pent. I bet that's slow.

No , it's not mmx 🤣 .

overdrive333 wrote:

Jade Falcon wrote:

Tetrium wrote:

I see you also like having lots of tabs open? 😜

Wow and on a mmx pent. I bet that's slow.

No , it's not mmx 🤣 .

Oh. you did a good job tricking me into thinking you were using the sk7 system.

Nice case and system BTW. I'd look for a AT back plate.
I like the city skyline wallpaper too.

overdrive333 wrote:

But hipro has only 21A on +5v rail. What do you think?

Socket 7 CPUs require very little current from the 5V rail.

😉

Adding Voodoo1 or 2 and replacing LCD monitor with 17 or 19" CRT would make it perfect. Also CD-ROM speed of 16-32X would be more time correct. 4X is 1994 era.

overdrive333 wrote:

😉

Thta's very clever! Looks pretty good as well 😀