Atrend ATC 6220 +Win98SE + AGP support \ VOGONS

Atrend ATC 6220 +Win98SE + AGP support

Topic actions

First post, by 5P133

Posted on 2017-09-16, 21:25

5P133 Offline

Rank Newbie

Rank: Newbie
Posts: 17
Joined: 2017-09-16, 21:17

Hello everyone here, it's my first post and I come with a problem. Today I've finally built a system on ATrend ATC-6220 & board running on Windows98SE in addition with PII400, 64MB SDRAM PC133 and Riva TNT/Ati Rage Fury Maxx and the problem is that the video card is detected as PCI. I can't install any driver from Ati and Detonators for TNT install but don't change anything. It just runs on standard pci driver with 640x480x16 colors. I've installed drivers from http://www.philscomputerlab.com/intel.html but it didn't help. Anyone here had the same problem? Is the AGP port broken?
?

ATrend ATC 6220 + PII400 + 256MB RAM PC133 + Ati Rage Fury Pro 32MB + Creative Labs Voodoo2 8MB + Aztech 2320 + Win98SE

Reply 1 of 5, by cyclone3d

Posted on 2017-09-16, 22:14

cyclone3d Offline

Rank l33t++

Rank: l33t++
Posts: 7947
Joined: 2015-04-08, 06:06
Location: Huntsville, AL USA

Do you have two video cards installed or are you trying with two different video cards?

What is the model number/brand of the video card(s) ?

Pics?

Yamaha modified setupds and drivers
Yamaha XG repository
YMF7x4 Guide
Aopen AW744L II SB-LINK

Reply 2 of 5, by 5P133

Posted on 2017-09-16, 22:19

5P133 Offline

Rank Newbie

Rank: Newbie
Posts: 17
Joined: 2017-09-16, 21:17

Sure no, I just own two cards and I test them both and with both cards there is the same problem. Ati Rage Fury Maxx and Diamond Viper V550

ATrend ATC 6220 + PII400 + 256MB RAM PC133 + Ati Rage Fury Pro 32MB + Creative Labs Voodoo2 8MB + Aztech 2320 + Win98SE

Reply 3 of 5, by cyclone3d

Posted on 2017-09-16, 22:23

cyclone3d Offline

Rank l33t++

Rank: l33t++
Posts: 7947
Joined: 2015-04-08, 06:06
Location: Huntsville, AL USA

If you are getting video out of them when plugged into the AGP port, then it should be ok.

What does the device manager say? Anything that has exclamation points or red Xs?

Do you have the latest BIOS for your motherboard?

Have you tried resetting the BIOS settings/clearing CMOS?

Yamaha modified setupds and drivers
Yamaha XG repository
YMF7x4 Guide
Aopen AW744L II SB-LINK

Reply 4 of 5, by 5P133

Posted on 2017-09-16, 22:28

5P133 Offline

Rank Newbie

Rank: Newbie
Posts: 17
Joined: 2017-09-16, 21:17

These cards run just detected as standard pci vga. Mobo bios 1.1.07WB, I just saw there is newer BIOS but im always afraid of updating it. The BIOS was cleared as I changed the CMOS battery before I started building the system.

ATrend ATC 6220 + PII400 + 256MB RAM PC133 + Ati Rage Fury Pro 32MB + Creative Labs Voodoo2 8MB + Aztech 2320 + Win98SE

Reply 5 of 5, by 5P133

Posted on 2017-09-19, 13:22

5P133 Offline

Rank Newbie

Rank: Newbie
Posts: 17
Joined: 2017-09-16, 21:17

Finally got this shit working. I had to fill all 3 memory banks...

ATrend ATC 6220 + PII400 + 256MB RAM PC133 + Ati Rage Fury Pro 32MB + Creative Labs Voodoo2 8MB + Aztech 2320 + Win98SE

Go to top of page Go to top of page

Back to Video