VOGONS


First post, by meljor

User metadata
Rank Oldbie
Rank
Oldbie

Does anyone have the Cyrix 5x86 100GP running on this board? I have tried the jumpers and RN settings for a Cyrix cpu as well as Amd and Intel dx4 and it keeps finding it as a enhanced dx4-s cpu or something like that. It hangs at boot so something is not right. Running a 5x86-133 AMD is no problem and boots fine and the bios is using the right name for it. I'm running the latest bios.

It is a great board but i can not find any documentation for jumper settings for the fastest cpu's except Intel DX4-100.

I have 2 of these boards and on one of them it says that a certain jumper (JP23?) is for amd/intel 3,3v but for Cyrix it is 5v and it should be set differently to get 3,3v ??
How is that possible? The other board does not have a header on JP23 so it does lack this text.

Thank you!

Last edited by meljor on 2017-11-25, 08:08. Edited 1 time in total.

asus tx97-e, 233mmx, voodoo1, s3 virge ,sb16
asus p5a, k6-3+ @ 550mhz, voodoo2 12mb sli, gf2 gts, awe32
asus p3b-f, p3-700, voodoo3 3500TV agp, awe64
asus tusl2-c, p3-S 1,4ghz, voodoo5 5500, live!
asus a7n8x DL, barton cpu, 6800ultra, Voodoo3 pci, audigy1

Reply 1 of 6, by vandenabeele andries

User metadata
Rank Newbie
Rank
Newbie

I also just ordered a 5x86100P Cyrix 😊 😊

Reply 2 of 6, by meljor

User metadata
Rank Oldbie
Rank
Oldbie
vandenabeele andries wrote:

I also just ordered a 5x86100P Cyrix 😊 😊

It is a fast cpu. @120mhz it almost keeps up with an AMD @160mhz on my Aopen AP43 board. Just hope to run it at one of the Gigabyte boards to compare.

asus tx97-e, 233mmx, voodoo1, s3 virge ,sb16
asus p5a, k6-3+ @ 550mhz, voodoo2 12mb sli, gf2 gts, awe32
asus p3b-f, p3-700, voodoo3 3500TV agp, awe64
asus tusl2-c, p3-S 1,4ghz, voodoo5 5500, live!
asus a7n8x DL, barton cpu, 6800ultra, Voodoo3 pci, audigy1

Reply 3 of 6, by jesolo

User metadata
Rank l33t
Rank
l33t

This is the latest revision which I found which supports the Cyrix 5x86 & AMD 5x86 CPU's (maybe just verify that this is the version you have):

The attachment 4AM1107.ZIP is no longer available

I've also attached the Flash BIOS utility that Gigabyte released back then - read the instructions carefully.

The attachment af.zip is no longer available

Reply 4 of 6, by meljor

User metadata
Rank Oldbie
Rank
Oldbie
jesolo wrote:
This is the latest revision which I found which supports the Cyrix 5x86 & AMD 5x86 CPU's (maybe just verify that this is the ver […]
Show full quote

This is the latest revision which I found which supports the Cyrix 5x86 & AMD 5x86 CPU's (maybe just verify that this is the version you have):

4AM1107.ZIP

I've also attached the Flash BIOS utility that Gigabyte released back then - read the instructions carefully.

af.zip

Thank you very much but that is the version i already have. But how do i set the jumpers for the Cyrix? I can not find any documentation about that.

asus tx97-e, 233mmx, voodoo1, s3 virge ,sb16
asus p5a, k6-3+ @ 550mhz, voodoo2 12mb sli, gf2 gts, awe32
asus p3b-f, p3-700, voodoo3 3500TV agp, awe64
asus tusl2-c, p3-S 1,4ghz, voodoo5 5500, live!
asus a7n8x DL, barton cpu, 6800ultra, Voodoo3 pci, audigy1

Reply 5 of 6, by jesolo

User metadata
Rank l33t
Rank
l33t
meljor wrote:

Thank you very much but that is the version i already have. But how do i set the jumpers for the Cyrix? I can not find any documentation about that.

I've been looking through the archives myself but, neither the manual nor any documentation appears to have been released that indicates what jumper settings must be used for the Cyrix 5x86 CPU's.
I've started to look at other similar motherboards from that era (that Gigabyte also released) and that did have support for the Cyrix 5x86 CPU's.
A good example is the GA-5486AL (of which I've attached the manual).
By comparing the jumper settings on the above mentioned motherboard, this should then give you an idea what jumper settings to use on your motherboard (in other words, although the jumpers might not be the same, compare the jumper settings on the GA-5486AL to the jumper settings of other CPU's to more or less establish which jumper settings should work for your motherboard).
You will have to check the "obvious" jumper settings (like voltage settings) to ensure that they are correct.

Reply 6 of 6, by meljor

User metadata
Rank Oldbie
Rank
Oldbie

Thanx! will try that later. On that board it seems to use the exact same setting as an Intel dx4-100.

asus tx97-e, 233mmx, voodoo1, s3 virge ,sb16
asus p5a, k6-3+ @ 550mhz, voodoo2 12mb sli, gf2 gts, awe32
asus p3b-f, p3-700, voodoo3 3500TV agp, awe64
asus tusl2-c, p3-S 1,4ghz, voodoo5 5500, live!
asus a7n8x DL, barton cpu, 6800ultra, Voodoo3 pci, audigy1