First post, by Rhuwyn
Not long ago on ebay there were a ton of these boards up for sales. Some with RAM and some without RAM. Unfortunately, I missed out on the lot with RAM and ended up settling for a buying a couple that did not have RAM. Unfortunately, I was unaware that I didn't have any 30Pin RAM left over from my glory days so I'm going to have to find some.
I know a lot of people on here bought these. I wanted to start a thread on our experience with them. What CPU's we used, how it worked for us, what video cards and controller cards we used....etc.
I found the below link that has the jumper settings. Some of the jumper settings confuse me. It looks like there is a Jumper for if the CPU speed is equal to or less then 33mhz or if it is higher then 33mhz. Then there is JP4 and JP9 which talk about speed configuration but not really clear on what they do. I want to start messing with this soon as I find my 30 pin RAM but I'm a little confused on what the jumper settings would be for say a DX2 66.
http://stason.org/TULARC/pc/motherboards/J/JO … 86-G486SVL.html