Tekram P5M3A+ Socket 7 board - missing parts \ VOGONS

Tekram P5M3A+ Socket 7 board - missing parts

Topic actions

First post, by BastlerMike

Posted on 2018-01-28, 01:03

BastlerMike Offline

Rank Member

Rank: Member
Posts: 234
Joined: 2010-10-11, 15:53

Does anybody have this mainboard ?
On my board there are two missing resistors R169 and R170. I suspect they have something to do with the IDE functionality because the primary IDE port is not working. The solder pads of these resistors are connected to some pins of the IDE connector.

Reply 1 of 3, by danijelm

Posted on 2018-01-29, 09:35

danijelm Offline

Rank Newbie

Rank: Newbie
Posts: 33
Joined: 2017-01-17, 13:48
Location: Croatia

It seems to me that the problem in the resistor package RN26 (the black part with 330 on it) seems to have been snapped. Also, it seems that the R169 and R170 have never been soldered to this board. Try to replace RN26.

I speak sarcasm as a 2nd language

Reply 2 of 3, by BastlerMike

Posted on 2018-01-29, 17:16

BastlerMike Offline

Rank Member

Rank: Member
Posts: 234
Joined: 2010-10-11, 15:53

The crumbled residues of R169 and R170 are already desoldered 😉 - RN26 is only superficially scratched

Reply 3 of 3, by Doornkaat

Posted on 2018-02-08, 16:32

Doornkaat Offline

Rank l33t

Rank: l33t
Posts: 2328
Joined: 2017-04-02, 06:50

If I read that correctly R169 and R170 should both be 33Ohm resistors.
If you need any other pictures of the board feel free to ask. 😀
edit: This is from REV.1.01

Go to top of page Go to top of page

Back to General Old Hardware