No mouse after installing SB16 drivers in Win3.1 \ VOGONS

No mouse after installing SB16 drivers in Win3.1

Topic actions

First post, by Tmp2k

Posted on 2018-04-17, 22:27

Tmp2k Offline

Rank Newbie

Rank: Newbie
Posts: 55
Joined: 2017-10-21, 20:10

I have an old 486 with an ISA SB16. I installed the PnP manager and drivers and everything works. IRQ5, DMA1+5. Checked BIOS, all are unused.

Now when Windows starts the pointer shoots off to the bottom left corner of the screen 😖

Reply 1 of 2, by oeuvre

Posted on 2018-04-18, 12:47

oeuvre Offline

Rank l33t

Rank: l33t
Posts: 3231
Joined: 2015-03-31, 13:31
Location: USA

Hmm that shouldn't happen. What kind of mouse is it? PS/2, serial, etc. Which DOS mouse driver are you using? (Really suggest CuteMouse). Share your AUTOEXEC.BAT + CONFIG.SYS here. Also go to Windows setup from DOS and change your mouse settings there if necessary.

HP Z420 Workstation Intel Xeon E5-1620, 32GB, RADEON HD7850 2GB, SSD + HD, XP/7

Reply 2 of 2, by Tmp2k

Posted on 2018-04-18, 19:57

Tmp2k Offline

Rank Newbie

Rank: Newbie
Posts: 55
Joined: 2017-10-21, 20:10

It's a PS/2. It's an OEM Olivetti PCS/44 with OEM mouse and the drivers that came with the system.

I'll try and get the autoexec/config off it and post it up.

Go to top of page Go to top of page

Back to Sound