First post, by Phreeze
- Rank
- Member
Hi, as statet in another thread, I can't get the P3 to work in my CUBX board. It's a BX chipset board.
CPU is 1000Mhz, 256k cache, 133FSB, coppermine, SL4MF stepping
It SHOULD run in the board shouldn't it?
I put it in, jumperless setting, as it's a new cpu, bios tells me to set the frequency. in failsafe it runs at 500Mhz, 66 FSB. Multiplier is correctly fixed (greyed out) at 7.5. If i set the FSB to 100/33 or 133/33, it doesn't boot anymore. black screen, but all fans running.
If i set the dipswitch manuall to 7.5 x 133, agp set to 2/3 of FSB (other possibility is 1xFSB, which would be way too much), the PC detects my tnt2 pro, and stays at that screen.
it already had the latest bios 1008 beta 4 and i also tested the modded tualatin bios,same story.
any other idea? (RAM is PC133 with 8 chips, tested all my bars, from 128 to 512MB)
ArGUS Parts list: http://bit.ly/2Ddf89V