sb 16 ct2230 problem \ VOGONS

sb 16 ct2230 problem

Topic actions

First post, by i2lgames

Posted on 2019-04-22, 12:17

i2lgames Offline

Rank Newbie

Rank: Newbie
Posts: 71
Joined: 2003-11-14, 17:20

Hello, after years of use my sb16 ct2230 started giving me a "Wrong Base I/O Address or Audio Card is not detected at 220H" error. I tried everything i could regarding the software side of things. I tried using different motherboards but no luck. Do you have any suggestions on the hardware side?

Thank you.

Reply 1 of 5, by Zero_sugar

Posted on 2019-04-22, 23:33

Zero_sugar Offline

Rank Newbie

Rank: Newbie
Posts: 60
Joined: 2019-02-16, 05:31

Did any of the jumpers come loose?

Reply 2 of 5, by i2lgames

Posted on 2019-04-23, 05:41

i2lgames Offline

Rank Newbie

Rank: Newbie
Posts: 71
Joined: 2003-11-14, 17:20

No i double checked them and used new jumpers too. I tried different addresses like 240 but still nothing.

Reply 3 of 5, by i2lgames

Posted on 2019-04-23, 06:54

i2lgames Offline

Rank Newbie

Rank: Newbie
Posts: 71
Joined: 2003-11-14, 17:20

Can it be the voltage regulators or the oscillators? The capacitors all look fine.

Reply 4 of 5, by rasz_pl

Posted on 2019-04-23, 10:16

rasz_pl Offline

Rank l33t

Rank: l33t
Posts: 3582
Joined: 2017-06-04, 00:57

it can be anything, grab multimeter and check

Open Source AT&T Globalyst/NCR/FIC 486-GAC-2 proprietary Cache Module reproduction

Reply 5 of 5, by i2lgames

Posted on 2019-04-23, 11:07

i2lgames Offline

Rank Newbie

Rank: Newbie
Posts: 71
Joined: 2003-11-14, 17:20

rasz_pl wrote:
it can be anything, grab multimeter and check

Will do. I notice that it "booms" when i turn the PC on and off.

Go to top of page Go to top of page

Back to Sound