First post, by AlessandroB
i have read in many places that this chip can work without cooling system... is true? Mine is labelled on top “heatsink and fan required” 😐
i have read in many places that this chip can work without cooling system... is true? Mine is labelled on top “heatsink and fan required” 😐
You pretty much always need a heatsink and a fan is highly advisable if the heatsink isn't particularly big. These chips do get pretty hot even at 3.3V.
T-04YBSC, a new YMF71x based sound card & Official VOGONS thread about it
Newly made 4MB 60ns 30pin SIMMs ~
mida sa loed ? nagunii aru ei saa 😜
But... there is a version that not require cooling system?
No.
Trying to identify old hardware ? Visit The retro web - Project's thread The Retro Web project - a stason.org/TH99 alternative
ok i get it, as soon as i can unplug the DX2 I see to insert the 5x86 and try to see how it works. tnks guys
You need a board capable of 3.3V before you can use the 5x86. Chances are that your board is 5V only and that will fry the 5x86 sooner or later. Can you show a photo of the board ?
T-04YBSC, a new YMF71x based sound card & Official VOGONS thread about it
Newly made 4MB 60ns 30pin SIMMs ~
mida sa loed ? nagunii aru ei saa 😜
My board is capable for sure, the only cpu that can’t handle is the Pentium Overdrive. Is a SBC 486 really good equipped. The only bad thing is that not have a ZIP Socket and i must use some tool to detach the DX2 Cpu that is actually inserted