First post, by JackH
- Rank
- Newbie
I have two Cirrus Logic CL-GD5446BV HC-V 1Mb (expanded) PCI cards (one with 60ns rams and other with 70ns rams), both looking fine, both have this same vertical lines problem when using lower resolutions, 256 color mode in Windows ME (I also tested them in my Windows 98 PC without drivers) and in DOS games? When I changed to High Color 16 bit or True Color 24 bit modes in my Windows ME PC, they worked fine? Windows games and DOS games with SVGA resolutions support (like DN3D, 800x600) worked. Monitors were Benq 21,5-24" models G2222HDL and BL2400PU (I changed to 4:3 aspect ratio, no affect). Should I try with CRT monitor or with some other drivers? Any suggestion how to fix this? It has been 10 years since I last time used these cards and do not remeber this issue?
P.S. Windows ME automaticly installed drivers: CIRRUSMM.DRV 4.10.1650 and CIRRUS.VXD 4.10.1633
Here is some example pics: https://drive.google.com/open?id=1iAcnsZdgFFo … ijiW3j-7f3aEhnu
P.S.2 Anyone who has this model series card have you faced this problem? I also have DOS 5.0 PC with Cirrus Logic CL-GD5428 (integrated ISA card) no problems.
