Dutchmen all speak English. Try emailing them.

Errius wrote on 2020-03-27, 20:35:

Dutchmen all speak English. Try emailing them.

I was unaware of this, thank you.
Email sent. Now we wait.

Given their stock list, I'd wonder if that site is still live, but who knows.

The website is still open but his stock is nowhere near as good as it looks.
For AOpen he only has an H500C.
I'm seeing if they can take pics of the cage, to see if it is the same.

TigerBill wrote on 2020-03-28, 12:34:

The website is still open but his stock is nowhere near as good as it looks.
For AOpen he only has an H500C.
I'm seeing if they can take pics of the cage, to see if it is the same.

They list under CPUs: For example Slot A Athlon 700 MHz, available 😁 😁

TigerBill wrote on 2020-03-28, 12:34:

The website is still open but his stock is nowhere near as good as it looks.
For AOpen he only has an H500C.
I'm seeing if they can take pics of the cage, to see if it is the same.

Well he only has whole cases for sale no parts. That makes sense but puts it out of the question cost wise, due to shipping.

Do you have a picture of the cage you need? I never get rid of any and might just happen to have something that would work.

From the archived page, it is a 3-bay cage:
http://web.archive.org/web/20031017024942/htt … ousing/ht45.htm

cyclone3d wrote on 2020-03-28, 15:32:

Do you have a picture of the cage you need? I never get rid of any and might just happen to have something that would work.

From the archived page, it is a 3-bay cage:
http://web.archive.org/web/20031017024942/htt … ousing/ht45.htm

I do not have any pics of the cage. I only just figured out the model number of this case a day before I posted here.
FYI, I need the 2x3.5" floppy drive cage not the 3x5.25" optical drive cage.

TigerBill wrote on 2020-03-28, 17:01:

cyclone3d wrote on 2020-03-28, 15:32:

Do you have a picture of the cage you need? I never get rid of any and might just happen to have something that would work.

From the archived page, it is a 3-bay cage:
http://web.archive.org/web/20031017024942/htt … ousing/ht45.htm

I do not have any pics of the cage. I only just figured out the model number of this case a day before I posted here.
FYI, I need the 2x3.5" floppy drive cage not the 3x5.25" optical drive cage.

Ok. The 3.5 cage should have 2 slots that you can use for external / internal and an additional one that is internal only.

That sounds right. The internal only 3.5 is probably for the HDD since, there is no current place to mount one.

The 45 series all seem to share a commonn sub-frame, so there are some useful pics here (particularly guide45.zip > guide-h45f.jpg)

ftp://ftp.aopen.com/pub/manual/housing/hx45/

Edit: also here, a review of the HX45 with good pics

http://www.dansdata.com/hx45.htm