First post, by Marco
Guys
I am going mad. 1am here and still no solution:
My above nw card jumperless won’t work on irq10. I set up via msclient Setup to 10 (adress 300) but then it won’t work meaning no network connect. MSD shows it on irq10 (ms2000). But it simply won’t connect.
When changing it back to Irq2 it connects flawless. MSD also shows it correctly at irq2.
IRQ10 is not being used by sth else see screenshot. Any idea? I already disabled com2 just in case in needs to stay there.
Ps. I’m using smartbootmanager but that’s irrelevant I assume. Pc is 486dx/2 66 vlb with award bios
Many thanks
1) VLSI SCAMP 311 | 386SX25@30 | 16MB | CL-GD5434 | CT2830| SCC-1 | MT32 | Fast-SCSI AHA 1542CF + BlueSCSI v2/15k U320
2) SIS486 | 486DX/2 66(@80) | 32MB | TGUI9440 | SG NX Pro 16 | LAPC-I