First post, by Sphere478
- Rank
- l33t++
what's up!
so I'm starting a wacky socket 7 build using a iWill p55xb2 motherboard
I did some tinkering on this motherboard 16 years ago and this is what I was able to accomplish through jumpers
well i was able to get a 75mhzfsb / 450core out o this mobo heres how […]
well i was able to get a 75mhzfsb / 450core out o this mobo heres how
what efect the jumpers on a iwill p55xb2 rev1.21 have on a k62+ 550
120=360 core 60.1 fsb
133=400 core 66.8 fsb
150=120 core 48.1 fsb
166=133 core 53.5 fsb
200=200 core 66.8 fsb
c200+=451 core 75.2fsb
233=233 core 66.8 fsb
266=400 core 66.8 fsb
300=133 core 53.5 fsb
t75=451 core 75.2 fsb
rsv=no post (cyrix cpus only i think)
if 83mhz isnt in the 2 i havent tried does any one know of a way i can get to it maby 2 jumppers? ill try thise 2 but i dont think its on them ill keep u guys posted.... well i checked and its a no go only 75mhz butim gonna try combinations of 2 jumpersthis is suposed to enable some features of the k6+ on unsuported mobos
http://www.upgradeability.com/K6plus/utilities.htmgot the linky from repo man11
this time around I think I may be able to use a 10k resistor to specific pins on the clock gen and then to ground to set the unjumperable speeds
i can't seem to find the specific datasheet for this clock gen though. just one for ones with similar part numbers?
help?