Artex wrote on 2020-04-25, 16:08:

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 ! [IMG=https://imagiz […]
Show full quote

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 !
[/IMG]

where'd you get that from?

I've been looking all over the place and I can only find chinese sellers.

The links and images aren't working for me somehow. The ET4000/w32p VLB card is the best card for both Windows and DOS. I get pretty good framerates in DOS games with a 133MHz CPU (using that CPU in my Packard Bell and will set the cache to WT on it now since the turbo shortcut keys don't work, except for cache controlling software).

appiah4 wrote on 2020-04-25, 19:45:

Another Artex post.. FML..

🤣. Thanks for the kudos all and I hope everyone is staying healthy during these crazy times by sheltering in place with your retro gear! 😀

imi wrote on 2020-04-25, 19:50:

Artex wrote on 2020-04-25, 16:08:

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 ! [IMG=https://imagiz […]
Show full quote

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 !
[/IMG]

where'd you get that from?

I've been looking all over the place and I can only find chinese sellers.

I took a gamble on a Chinese seller and purchased one from there. Seems to be in good shape physically and stable thus far. The real measure of success will be time - but I don't plan to go to crazy with overclocking it. I just wanted a COVID project so I performed this and some other upgrades on my T61 laptop. I wrote up a whole Word doc on the experience and I'll post it on VOGONS next week sometime. A fun, and sometimes challenging project but the laptop has been running cool and quiet, humming along with a (now) undervolted NVIDIA GPU and 1.0875v Core 2 Extreme running at 2.8Ghz in the high 30's to mid 40's at idle and with TPFanControl it really never gots hotter than 55C at load. Pretty impressive and a nice boost from the 65nm T7300.

[/IMG]
[/IMG]

bjwil1991 wrote on 2020-04-25, 20:00:

The links and images aren't working for me somehow. The ET4000/w32p VLB card is the best card for both Windows and DOS. I get pretty good framerates in DOS games with a 133MHz CPU (using that CPU in my Packard Bell and will set the cache to WT on it now since the turbo shortcut keys don't work, except for cache controlling software).

For sure - it's a solid card and increasingly difficult to find these days. This one popped up in my search and a nabbed it as quick as my fingers would allow me.

eBay, Amazon, or ComputerPartsGalore.com?

Artex wrote on 2020-04-25, 20:38:

imi wrote on 2020-04-25, 19:50:

Artex wrote on 2020-04-25, 16:08:

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 ! [IMG=https://imagiz […]
Show full quote

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 !
[/IMG]

where'd you get that from?

I've been looking all over the place and I can only find chinese sellers.

I took a gamble on a Chinese seller and purchased one from there.

so that seems to be the only way I guess ^^, might I ask which seller? there are a whole bunch and some of them aren't really chip sellers.

imi wrote on 2020-04-25, 23:08:

so that seems to be the only way I guess ^^, might I ask which seller? there are a whole bunch and some of them aren't really chip sellers.

Sent ya a PM!

Kingston Turbochip TC5X86/133 for my other 486 build.

Artex wrote on 2020-04-25, 20:38:

I took a gamble on a Chinese seller and purchased one from there. Seems to be in good shape physically and stable thus far. T […]
Show full quote

imi wrote on 2020-04-25, 19:50:

Artex wrote on 2020-04-25, 16:08:

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 ! [IMG=https://imagiz […]
Show full quote

Intel Core 2 Extreme Mobile X9000 SLAZ3 (Penryn) Socket P 2.8GHz (2008) - Upgraded my good old Lenovo T61 !
[/IMG]

where'd you get that from?

I've been looking all over the place and I can only find chinese sellers.

I took a gamble on a Chinese seller and purchased one from there. Seems to be in good shape physically and stable thus far. The real measure of success will be time - but I don't plan to go to crazy with overclocking it. I just wanted a COVID project so I performed this and some other upgrades on my T61 laptop. I wrote up a whole Word doc on the experience and I'll post it on VOGONS next week sometime. A fun, and sometimes challenging project but the laptop has been running cool and quiet, humming along with a (now) undervolted NVIDIA GPU and 1.0875v Core 2 Extreme running at 2.8Ghz in the high 30's to mid 40's at idle and with TPFanControl it really never gots hotter than 55C at load. Pretty impressive and a nice boost from the 65nm T7300.

[/IMG]
[/IMG]

Wowah, wait a minute - there is a faster upgrade for my IBM T61 Thinkpad that goes beyond the T7800 I'm currently using? Can the motherboard handle the current requirements? Did you check the VRM output spec on the motherboard to ensure that too short of time won't kill the VRM or motherboard when using the SLAZ3 2.8Ghz/6M? I'm still using the T61. It sits on the kitchen counter. The damn WiFi kept cutting out, so I'm using a PCMCIA card now. I had previously replaced the internal WiFi with the latest Intel offerings that would work with XP, but it too died in short order (about 4 months of use).

In order to add another chipset to the list and finally have a complete test of Tualatin-capable chipsets in Win2K, I just put in an order for a NOS Chaintech 6VJD, based on the ViaPro266DDR :d.

It will not beat the BX, probably. But no scientific study is complete if all possibilities are not explored.

Yeah, a VIA 266 Pro board is definitely required for that comparison.

A few days ago I got a Roland D-10 for free from a friend of mine.
After cleaning and replacing the battery it works like new.
I doubt I can do anything with it related to DOS gaming though. Or would it be MT-32 compatible with a few tricks?

CHiLL72 wrote on 2020-04-24, 20:47:

Received my first Super Socket 7 mainboard a few days ago, an EPOX EP58-MVP3C-M, which I decided to test today. It came with RAM, Pentium MMX 233MHz CPU and CL5446 PCI VGA. I fired it up and it worked just fine. Booted from a floppy disk. I had already downloaded the manual and the latest BIOS for it, so I flashed the BIOS, which seemed to go just fine. But apparently that was a bad idea.... the board won't boot anymore. 🙁
Now I'll have to find a way program another BIOS chip, which is tricky without an EPROM programmer.
I had planned to test all the Pentium, Cyrix and AMD K6/K6-2 CPUs I have kept in box for years....

I know you're already being helped by some fantastic VOGONS, but, if you have an Ethernet NIC with a ROM socket on it, that might work as an EEPROM programmer. Certain NIC chipsets can be used with ROM flashing utilities, like FlashROM.

feipoa wrote on 2020-04-26, 05:35:

Wowah, wait a minute - there is a faster upgrade for my IBM T61 Thinkpad that goes beyond the T7800 I'm currently using? Can the motherboard handle the current requirements? Did you check the VRM output spec on the motherboard to ensure that too short of time won't kill the VRM or motherboard when using the SLAZ3 2.8Ghz/6M? I'm still using the T61. It sits on the kitchen counter. The damn WiFi kept cutting out, so I'm using a PCMCIA card now. I had previously replaced the internal WiFi with the latest Intel offerings that would work with XP, but it too died in short order (about 4 months of use).

I put up my article here for anyone interested: Artex's COVID-19 Pandemic Project - Lenovo T61 Upgrades!

Local guy has an old Compaq P4 tower for $15, has bad/missing HD but otherwise works/boots. Includes original keyboard and ms mouse. Told em I was interested so will go meet somewhere later today.

EDIT: Not a Compaq, actually not a bad little machine. Will post specs later after I clean it up a bit...

Salient wrote on 2020-04-26, 13:16:

A few days ago I got a Roland D-10 for free from a friend of mine.
After cleaning and replacing the battery it works like new.
I doubt I can do anything with it related to DOS gaming though. Or would it be MT-32 compatible with a few tricks?

Oh man, that brings back a lot of memories. I had the D-20 which adds a floppy drive and 8-track sequencer. It was a very versatile workstation. Your D-10 looks like new condition. Very nice!

Got an ARK2000 today for 4 EUR. Saving this for my DOS game pc.

EvieSigma wrote on 2020-04-24, 02:19:

I got this adorable little IBM Aptiva for a great price off eBay, with keyboard and mouse even. Has a 500Mhz K6-2 and 128MB of R […]
Show full quote

I got this adorable little IBM Aptiva for a great price off eBay, with keyboard and mouse even. Has a 500Mhz K6-2 and 128MB of RAM.

I've got one of those 😀 cute little machine. Can probably be upgraded to a K6-III although I've not investigated. The 500 is good anyway, as the 350 and 400MHz parts are much more common. Makes a good Voodoo 3 DOS gaming machine. Can't remember what the built-in audio is but I seem to remember it being OPL3? Anyway, have fun!

I bought this NOS ASUS MediaBus VGA/Audio card without even owning a MediaBus motherboard. It's just so strange that I had to have it for my collection: S3 Vision868 and Creative Vibra16 (and OPL3) on the same card. Maybe one day I'll build a system around it.