SB 2.0 CT1350 CMS chips dumped

Announcements, advice, random banter, unrelated discussion, et cetera.

Re: SB 2.0 CT1350 CMS chips dumped

Postby Robin4 » 2012-3-01 @ 00:31

DonutKing wrote:CONFIRMED WORKING!

My programmer and some GAL chips arrived today, so I got busy and programmed the JED file onto a couple of GAL16V8D chips, then stuck them and two SAA1099 chips into both of my Sound Blaster 2.0's :)

Image

You do require the CMS driver here: http://cloudschatze.googlepages.com/CMSDRV.com which isn't included in the Creative downloadable driver pack, but once that's done the CMS support is functional. Tested Loom and Monkey Island 1 so far, works perfectly, although the sound seems a lot more filtered and nowhere near as loud, as a real CMS/Game Blaster.


Whats the type of gal you are using?? Because i cant read the specs what written on it.
~ At least it can do black and white~
User avatar
Robin4
Oldbie
 
Posts: 1205
Joined: 2011-4-04 @ 09:52
Location: THE NETHERLANDS

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-3-01 @ 00:39

Lattice GAL16V8 15LPN
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby keropi » 2012-3-01 @ 00:45

so DK it works fine on your rev0 1350? or you got fooled like me, hearing CMS and then not bother checking the SB part? lol
Image
Image Dead Roland SC-55 MK2 wanted , click me for AmiBay ad!
Image Free bios/firmware/program chip burning service for active VOGONS members. PM me.
User avatar
keropi
l33t
 
Posts: 3261
Joined: 2003-9-08 @ 06:45
Location: Greece

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-3-01 @ 01:00

I don't have that card any more, I gave it to SquallStrife.

I thought that card was faulty. It worked with Adlib and CMS, but the digital never worked, even before I put the GAL/SAA1099P chips in it. When I gave it away the CMS had stopped working too.

I have a rev 3 card not in the picture, both the rev 3 and rev 4 cards work perfectly, CMS, adlib, digital.
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby SquallStrife » 2012-3-01 @ 02:39

Where are y'all getting your SAA1099P chips from? Two places I've enquired at haven't returned my emails, and I don't fancy paying $10/chip on eBay.
VogonsDrivers.com | Link | News Thread
[retro swim] | Link | Release Thread
Follow me on Twitter: https://twitter.com/SquallStrifeAU
User avatar
SquallStrife
Oldbie
 
Posts: 1914
Joined: 2010-2-06 @ 15:18
Location: Drowning in consoles

Re: SB 2.0 CT1350 CMS chips dumped

Postby keropi » 2012-3-01 @ 07:16

SquallStrife , I got mine from www.utsource.net and before that eBay for 10+$/piece
Image
Image Dead Roland SC-55 MK2 wanted , click me for AmiBay ad!
Image Free bios/firmware/program chip burning service for active VOGONS members. PM me.
User avatar
keropi
l33t
 
Posts: 3261
Joined: 2003-9-08 @ 06:45
Location: Greece

Re: SB 2.0 CT1350 CMS chips dumped

Postby maddmaxstar » 2012-3-03 @ 06:05

I got my SAA1099P's for 10$ shipped from UTSource.net. They arrived pretty quickly from Singapore too, under 2 weeks.

I don't check this page for a week and theres 2 full pages of comments... I saw earlier mention of my issues with the chips on my card. The issue was me, I thought the CMS jumper needed to be on when it was supposed to be off (I didn't see the OFF in CMSOFF). I removed the jumper and it works fine. No issues with Adlib/Sound Blaster functions either.

I'll take a picture of my card and look for its revision number in a bit, probably the morning as it's late here :P
= Phenom II X6 1090T(HD4850) =
= K7-550(V3-3000) =
= K6-2+ 500(V3-2000) =
= Pentium 75 Gold(Voodoo1) =
= Am486DX4-120(3DXpression+) =
= TI486DLC-40(T8900D) =
= i386sx-16+i387(T8900D) =
User avatar
maddmaxstar
Member
 
Posts: 231
Joined: 2012-1-08 @ 21:18
Location: New Brunswick

Re: SB 2.0 CT1350 CMS chips dumped

Postby dacow » 2012-3-03 @ 07:01

Will be interesting to see if you have a rev3 or rev4 card :)
User avatar
dacow
Member
 
Posts: 116
Joined: 2011-1-11 @ 10:34
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-3-06 @ 23:18

New GAL chips have arrived!

Please see the Amibay thread for info.

http://www.amibay.com/showthread.php?p= ... post277845

Note that price has changed.

I also ask people to post in the thread at Amibay, rather than PM me here, as its easier for me to keep track of everything in the one thread and I don't want to be seen to be circumventing the 'no trading' rule here.
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-3-12 @ 07:45

I have confirmation that a REV 2 card works perfectly with these GAL chips. It seems that only original version cards without a revision number have an issue.
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby keropi » 2012-3-23 @ 08:19

just a small update, Chuck(G) notified me he received the rev0 card I sent him, all we need now is to wait patiently and hopefully he will find out what is wrong :)
Image
Image Dead Roland SC-55 MK2 wanted , click me for AmiBay ad!
Image Free bios/firmware/program chip burning service for active VOGONS members. PM me.
User avatar
keropi
l33t
 
Posts: 3261
Joined: 2003-9-08 @ 06:45
Location: Greece

Re: SB 2.0 CT1350 CMS chips dumped

Postby Robin4 » 2012-3-27 @ 01:05

Is there already some information about that REV0 card?
~ At least it can do black and white~
User avatar
Robin4
Oldbie
 
Posts: 1205
Joined: 2011-4-04 @ 09:52
Location: THE NETHERLANDS

Re: SB 2.0 CT1350 CMS chips dumped

Postby keropi » 2012-3-27 @ 06:31

nope, not yet... I assume Chuck(G) hasn't look at it yet, he has some more work before that... and personally I am not bugging him about that since there is no real hurry and he is infact doing a favor to the community :)
If it wasn't for him then noone would have a clone chip :D so let him take his time
Image
Image Dead Roland SC-55 MK2 wanted , click me for AmiBay ad!
Image Free bios/firmware/program chip burning service for active VOGONS members. PM me.
User avatar
keropi
l33t
 
Posts: 3261
Joined: 2003-9-08 @ 06:45
Location: Greece

Re: SB 2.0 CT1350 CMS chips dumped

Postby keropi » 2012-4-18 @ 06:34

it seems some advancement was made on the problem , look here: http://www.vintage-computer.com/vcforum ... 1350/page3
Image
Image Dead Roland SC-55 MK2 wanted , click me for AmiBay ad!
Image Free bios/firmware/program chip burning service for active VOGONS members. PM me.
User avatar
keropi
l33t
 
Posts: 3261
Joined: 2003-9-08 @ 06:45
Location: Greece

Re: SB 2.0 CT1350 CMS chips dumped

Postby genocho » 2012-4-19 @ 01:47

Has anyone tested the chuckg gal he posted here ???

http://www.vintage-computer.com/vcforum ... 1350/page4

Hope this can solve the issue !!!

Regards.
genocho
Newbie
 
Posts: 10
Joined: 2008-7-05 @ 11:22

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-4-19 @ 03:36

I will try it on my rev 3 and 4 cards; but they already work with the existing JED files so I don't know if it will prove anything. I no longer have a rev 0 card to test with.
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby SquallStrife » 2012-4-20 @ 01:13

With the GAL removed, that SB card you gave me works OK.

If you burn the new image to a chip, you could send it this way and I could test it.

(Also, I could send you back the presumably working GAL that I have)
VogonsDrivers.com | Link | News Thread
[retro swim] | Link | Release Thread
Follow me on Twitter: https://twitter.com/SquallStrifeAU
User avatar
SquallStrife
Oldbie
 
Posts: 1914
Joined: 2010-2-06 @ 15:18
Location: Drowning in consoles

Re: SB 2.0 CT1350 CMS chips dumped

Postby DonutKing » 2012-4-20 @ 01:33

With the GAL removed, that SB card you gave me works OK.


Both FM and digital sound?

PM your postage address and I'll try to program a chip this weekend with the new codes :)
If you are squeamish, don't prod the beach rubble.
User avatar
DonutKing
Oldbie
 
Posts: 1601
Joined: 2008-1-03 @ 03:23
Location: Australia

Re: SB 2.0 CT1350 CMS chips dumped

Postby SquallStrife » 2012-4-20 @ 01:53

DonutKing wrote:
With the GAL removed, that SB card you gave me works OK.


Both FM and digital sound?

PM your postage address and I'll try to program a chip this weekend with the new codes :)


Yeah, both. :)
VogonsDrivers.com | Link | News Thread
[retro swim] | Link | Release Thread
Follow me on Twitter: https://twitter.com/SquallStrifeAU
User avatar
SquallStrife
Oldbie
 
Posts: 1914
Joined: 2010-2-06 @ 15:18
Location: Drowning in consoles

Re: SB 2.0 CT1350 CMS chips dumped

Postby Mau1wurf1977 » 2012-4-20 @ 02:04

I have these two cards:

Image

Image

Happy to test if it helps!
User avatar
Mau1wurf1977
l33t++
 
Posts: 7438
Joined: 2010-8-27 @ 04:15
Location: Western Australia

PreviousNext

Return to Milliways

Who is online

Users browsing this forum: Artex, dacow, Google [Bot], sliderider and 3 guests