Reply 20 of 27, by arncht
- Rank
- Oldbie
here the "raw" build - to check everything works fine. i will polish it later.
Mainboard Intel Advanced/ZP Intel 430FX
CPU Intel Pentium 120 SY033
CPU cooler Socket 5 (blue)
RAM Micron 16M EDO 2x8M 72-pin
Video card Diamond Stealth 64 Video VRAM 2M PCI S3 Vision968
Sound card #1 Creative Sound Blaster AWE32 Value CT3910 ISA
Sound card #2 Gravis Ultrasound 3.74 1M ISA
HDD Western Digital Caviar 31200 1200M
ODD Sony CDU-77E 4x CD-ROM IDE
FDD Panasonic
Case Baby AT (blue button)
PSU FSP SPI-250G
I like that the beige of your floppy bezel and CD-ROM bezel match relatively well that of the case. Makes it look natural to the case.
There's an empty case badge indention - plan on filling it with a Pentium Inside badge? You can get these on eBay: download/file.php?id=71989&mode=view
Also, it looks like you have a 1+2 segment LED display. Plan on altering it to read 120 in turbo mode?
Plan your life wisely, you'll be dead before you know it.
i always matching the colors (within the authentic possibilities), the screws, etc. i want the illusion, this is a used authentic computer in a decent shape.
i will configure the display, correct alignment, cable management, etc. just i did so many times, i setup well, and something did not work (leds, etc) 😀 it was very annoying after spent hours with it.
stickers? maybe 😀 i think, this is the period correct version:
***
i found this case in a news paper from aug 1994.
That’s ok for a case sticker but is the wrong dimensions to completely fill the badge indention.
Plan your life wisely, you'll be dead before you know it.
there i plan the channel logo 😀 is there an online shop for these custom stickers?
led jumpering completed
project done, the first post updated.