VOGONS


First post, by harris286

User metadata
Rank Newbie
Rank
Newbie

Hello

I have a motherboard with pentium 2o0 mmx
The problem I have is that the cpu fans make a lot of noise.
Does it work fine if getting really hot with a single heatsink? No fan?

I had thought to put only the heatsink like this: (CPU Socket A 60x65mm)
71WFMsaFUeL._AC_SS450_.jpg

What is your opinion ?

I'm crazy ?

Last edited by harris286 on 2022-11-19, 18:06. Edited 1 time in total.

Reply 1 of 5, by Shponglefan

User metadata
Rank l33t
Rank
l33t

I would just use a quieter fan like a 60mm Noctua: https://noctua.at/en/products/fan/nf-a6x25-flx

I use one on my Pentium 133 and it's incredibly quiet. With the case closed I can only hear the PSU fan.

Pentium 4 Multi-OS Build
486 DX4-100 with 6 sound cards
486 DX-33 with 5 sound cards

Reply 2 of 5, by RandomStranger

User metadata
Rank Oldbie
Rank
Oldbie

It was still a low TDP CPU, somewhere around 16W I think. It's not impossible to keep it cool without a fan. If the heatsink is big enough.

sreq.png retrogamer-s.png

Reply 3 of 5, by gilly76

User metadata
Rank Newbie
Rank
Newbie

I replaced my PS fan with a newer quieter one (Noctua NF-R8 redux-1800) cause the stock 25+year old one was too damned loud. Now it's nice and quiet

Shponglefan wrote on 2022-11-19, 18:03:

I would just use a quieter fan like a 60mm Noctua: https://noctua.at/en/products/fan/nf-a6x25-flx

I use one on my Pentium 133 and it's incredibly quiet. With the case closed I can only hear the PSU fan.

Reply 4 of 5, by Sphere478

User metadata
Rank l33t++
Rank
l33t++

Try these.

https://www.ebay.com/itm/400986681836

The attachment 67B8ACF6-AFD1-4A27-A2FD-192812885AB9.jpeg is no longer available

Or this

Re: Stealth way to make fans quieter.
file.php?id=132031&mode=view

Sphere's PCB projects.
-
Sphere’s socket 5/7 cpu collection.
-
SUCCESSFUL K6-2+ to K6-3+ Full Cache Enable Mod
-
Tyan S1564S to S1564D single to dual processor conversion (also s1563 and s1562)

Reply 5 of 5, by Oddwarg

User metadata
Rank Newbie
Rank
Newbie

I've successfully used the resistor solutions above (both a prebuilt adapter and DIY version) to quiet down old fans, including a very noisy fan on a Pentium II. If you do that or decide to try removing the fan you should pay attention to the temperature for a good while under increasing load to make sure it doesn't get hot.