What resources get allocated to the card? And to the Soundblaster? This could be an IRQ or DMA conflict. Is it a PnP Vibra or non-PnP? Also with older PCI systems the slot you use can make a lot of difference. Try it in other slots. Finally there are usually BIOS settings regarding PCI (interrupt …

Hey all, I have an Intel Pro/100 Desktop ethernet adapter in my Windows 95 build. The card works, drivers are installed, and I can connect to my fileserver and even browse the web. But within 5 minutes, without fail, the whole system freezes, forcing me to restart. I have no idea what's causing this …

Possibly, but could also be a major I/O range conflict. Do you have another system with ISA bus? See if you have same issue there too. If so, card may be at fault, if not, it's a conflict in that specific machine. Unfortunately the only other thing I have is a Compaq Portable, which is so old I'm …

Did you already try reconfiguring your card using 3c5x9cfg in MS-DOS mode? This card can be run in PnP or EEPROM mode. Given general state of PnP on 486 hardware and in Win95, I'd thoroughly recommend running it as non-PnP in EEPROM mode. 3c5x9cfg will tell you if that is the case. Unfortunately I …

Hello, I have an ISA 3Com Etherlink III 3c509TP on my Windows 95 machine. I for the life of me cannot get it to function properly. If I let Windows detect and setup the card automatically, I get a "Your network adapter in ISA mode is not working properly" message on startup (see photo below). I've …