VOGONS

Search

Common searches

Search results

Display options

Display options

Re: AMD 486 DX4-90?

Posted on 2011-05-27, 00:09

Did you try 25? I'm surprised 33 didn't work. It would only be a 10mhz overclock which should be easy for these chips. No, I didn't. There was a hell of a lot of jumpers on that motherboard, and I had already run out of patience when I tried to run Doom and Duke Nukem 3D with an Intel DX2-66 and …

Re: AMD 486 DX4-90?

Posted on 2011-05-26, 17:18

I have yet to see a 486 motherboard with a 30mhz jumper setting. Why would anyone create a 30mhz setting when there is 33? I thought the same thing when I tried to install an AM486 DX4-90 on a standard motherboard (Chaintech 4UPB) and couldn't find the 30 MHz jumper. Finally I enabled the 33 MHz …

Re: Setting up Roland Sound Canvas SC-55

Posted on 2011-05-23, 02:26

I, unfortunately, do not have any ISA slots to put my Sound Blaster 16 on it (it has MPU401 I/O's, I think.). But I have heard that a Midi to USB cable should work just fine. Is that correct? You don't need a Sound Blaster 16 to connect the Sound Canvas. Actually the SB16 is not recommended at all …

Re: Carmageddon Max Pack 3dfx problem in real DOS

Posted on 2011-05-22, 20:46

in DOS
Ok, I've uploaded all my Carmageddon patches. IRQ settings in BIOS won't have any effect on Voodoo 1 or 2 because these cards don't need an IRQ. And no, setting up a Voodoo Graphics should not be that hard. I've never had any serious problem but desktop corruption when I used my Voodoo^2 with a …

Re: Carmageddon Max Pack 3dfx problem in real DOS

Posted on 2011-05-22, 16:54

in DOS
That error message appears when Glide can't find any 3dfx hardware. It's a common WinGlide error (almost everyone running glQuake for the first time must have seen it), but I had never seen it in DOS, because the usual behaviour of DosGlide games is to run in software mode if 3dfx mode fails. This …

Re: Tomb Raider inventory hang with Voodoo3 3000 and Glide patch

Posted on 2011-05-21, 13:51

in DOS
Sorry, it was a timing issue. Try to set these delays before running the game: SET SST_FT_CLK_DEL=0x4 SET SST_TF0_CLK_DEL=0x6 SET SST_TF1_CLK_DEL=0x6 SET SST_VIN_CLKDEL=0x1 SET SST_VOUT_CLKDEL=0x0 I've tried those settings on a Voodoo2 and they worked fine with the Voodoo Graphics patch. I also …

Re: Tomb Raider inventory hang with Voodoo3 3000 and Glide patch

Posted on 2011-05-20, 15:54

in DOS
Looks like a gamma issue. Copy and paste these commands to a text file: SET SST_RGAMMA=%1 SET SST_GGAMMA=%1 SET SST_BGAMMA=%1 Save it as GAMMA.BAT to some folder in your path. Now try different gamma values from 1 to 2 before running the game, that is: C:\TOMBRAID>GAMMA 1.3 C:\TOMBRAID>TOMB3DFX or …

Re: Tomb Raider inventory hang with Voodoo3 3000 and Glide patch

Posted on 2011-05-20, 13:13

in DOS
Yes, it is possible, but both cards will try to install glide2x.ovl, glide2x.dll and glide3x.dll files to the same locations, so a driver conflict may arise. If you will always use Voodoo1 for DOS and Voodoo3 for Windows, you can easily avoid any conflict. Install Voodoo3 driver first, and make a …

Re: Tomb Raider inventory hang with Voodoo3 3000 and Glide patch

Posted on 2011-05-20, 09:09

in DOS
The information you found on that page is very outdated (and wrong!!! Glide support in GeForce3 without a wrapper? No way). Anyway, you're trying the hard way to run Tomb Raider with hardware acceleration, that is, native 3dfx Glide in pure DOS, and I like challenges. Here are the actually useful …

Re: Tomb Raider inventory hang with Voodoo3 3000 and Glide patch

Posted on 2011-05-19, 15:11

in DOS
Usually you don't need to copy either glide2x.ovl or glide2x.dll to the game's folder, but they won't do much harm if your files are compatible with your actual card. I mean, V1 files with V1 card, V2 files with V2 card, V3 files with V3 card, and so on. It seems pretty straightforward, but some …

Re: Where can I find some ne2000 drivers for windows 3.1?

Posted on 2011-05-11, 18:48

in Windows
You can find a Novell NE2000 packet driver here: http://www.brutman.com/mTCP/mTCP_virtual_environments.html And here: http://home.arcor.de/h-a-l-9000/ne2kstuff/db_ne2000.html And here: http://www.novell.com/coolsolutions/tools/13555.html And here: http://www.georgpotthast.de/sioux/packet.htm And …

Re: dosbox vs dosemu

Posted on 2011-04-27, 22:18

Oh and Blood in particular - there's a Glide patch/port for that iirc, which could be run via Wine with a glide wrapper, if I'm not mistaken, which would wrap from Glide->Windows OpenGL->Linux OpenGL->Card - convoluted, but an option. Don't remember if it has an OpenGL or D3D version. The glide …

Page 10 of 20

Go to top of page Go to top of page
Close window
Close window