Re: Cropped screen
Posted on 2019-04-03, 07:50
Here we are...
Re: Cropped screen
Posted on 2019-04-02, 21:09
This photo is without TRS
Re: Cropped screen
Posted on 2019-04-02, 21:03
Hi, The dos application just fills the portion of screen "allowed" by dos and bios "limits", probably because of the laptop lcd, because, when I use an external display in CRT mode it properly behaves.
Re: Cropped screen
Posted on 2019-04-02, 13:04
I tried M2, but the whole dos "space" stays inside "borders", the same ones of the bios! The tsr works but with these limits! Do you think it's a think of my lcd laptop screen?
Re: Cropped screen
Posted on 2019-04-02, 12:16
Thank you very much! It works! In reality I don't know why, but my bios, "PHOENIXBIOS 4.0 release 5. 1" is a little bit cropped, and so all my dos things, even with the tsr! It seems that I can't change resolution in bios, so maybe an updated version can solve the issue?
Cropped screen
Posted on 2019-04-01, 20:24
Hello! I have a Siemens Nixdorf scenic mobile 710 with a 12.1" LCD TFT. I installed Windows 98 SE and I can fill the screen with 1024x768. The problem is in my dos application running at 800x600, which is cropped at the center of the screen. The program resolution is fixed. The bios does not have …
Re: Fastracker II & Midi
Posted on 2012-12-24, 10:41
The last hope is finding a PCMCIA to joystik interface which probably can give the internal sound card MPU401 port... It's impossible to find it today on ebay...something like JC Designs Gamecard Pro would suit........ I really would like to try it, just to see if it works........
Re: Fastracker II & Midi
Posted on 2012-12-23, 23:53
I don't think...the IBM Thinkpad 365xd laptop BIOS does not allow big changes to devices. I also found a dos tool called ESSCFG which allows to change irq, dma and, of course, mpu401. Obviously the mpu401 port can be 300, 310, 320, 330....but not other values. Actually the Roland SCP-55 is a great …
Re: Fastracker II & Midi
Posted on 2012-12-23, 20:42
I'm using win98se. I go to control panel. then system, then devices properties. Not all the settings for I/O can be changed. The settings for ss1688 I/O are 330-331 and there's no way to change them
Re: Fastracker II & Midi
Posted on 2012-12-23, 20:37
I wanna do this but I can't!
Re: Fastracker II & Midi
Posted on 2012-12-23, 20:02
The SCP-55 I/O port can be changed. I set it to 300-330 but conflict happens with es1688. The real problem is that I can change Roland scp-55 I/O port (it has a large range, it can be, for example, 300, 370 etc.) ) but I can't change the ES1688 port. Its range is limited to 300-330. Basically I …
Re: Fastracker II & Midi
Posted on 2012-12-23, 17:44
Apparently the es1688 mpu401 port can only be 300-300..... There are no solutions
Re: Fastracker II & Midi
Posted on 2012-12-22, 21:29
I'm trying to do this, but I get conflicts........
Re: Fastracker II & Midi
Posted on 2012-12-22, 18:42
Ah! Of course I cannot change I/O values relatives to MIDI in the control panel...
Re: Fastracker II & Midi
Posted on 2012-12-22, 18:31
Hello, lolo799! The SCP-55 works well under win98se to play mp3s etc. Midi works under other applications.... Also I tried Impulse Tracker (the developers were smarter...) which gives the possibility to choose a generic MPU401 driver.....(launching:"it /s19 /a370).....In my case the Roland has the …
Re: Fastracker II & Midi
Posted on 2012-12-22, 14:41
The main problem is the midi port at address 330..................
Re: Fastracker II & Midi
Posted on 2012-12-22, 12:58
Ok..... The card work in windows 98 and probably in dos..... but fastracker 2.08 only accepts Gravis Ultrasound or Sound Blaster..... I think I must give up 🙁
Re: Fastracker II & Midi
Posted on 2012-12-21, 18:05
I still have errors installing cardservices.....
Re: Fastracker II & Midi
Posted on 2012-12-18, 22:26
And also... did you tried similar conditions?
Re: Fastracker II & Midi
Posted on 2012-12-18, 22:24
Ok, now I'm formatting the hard disk and reinstalling dos 7.1 After that?
Page 3 of 4